Montesa

Guys can you tell me if there is a huge difference between a 2001 and a 2002 Montesa 315R? Thanks - matt.

A brief history for your diagnostic pleasure: - Its a 4 month old 2017 4RT, been ridden plenty, but like new - no knocks or damage - running the right transmission oil - The clutch has always felt odd to me - really on and off - but I put it down to new bike, newby on trials - Recently it became wildly erratic - super jumpy, sometime won't engage, then its back - The engagement point seems to move around then suddenly it won't engage at all - Thinking it must be an air problem I've bled the system three times, the last bottoms up, not a bubble - Stock MC looks fine, no leaks, don't see any cable leaks TTF is going on! Does this sound like a symptom y…

What I'd really like to know is why are there no top British riders on the Montesa 4rt? You have to go down to 5th in the expert B class to find one at the British solo trials champs at Kinlochleven, Bou seems to like his.

Pal of mine has an as new 2001 Montesa, really really clean what's it worth? In UK.

hi all i think the time has come to sell my beloved 315r. it is a 99 model and has had many extras ie, black renthal bars, new chain/ sprockets, new mich x11 hebo foot rests and bar ends, new cluch new front brake hose new rear pads re spoked front wheel oil change every trial as the title sugests, how much do you rekon it is worth?

can i tell the year of my bike from the frame no. ?

im trying to get my back break blead in rite i have it dont a bit but its just not as sharp as it should be any tips on geting it bang on? or improveing it?

between BR6ES plug and a BPR6ES plug? can i use the "p" plug in my 315r??

Hi can anybody tell me the exact year of my bike? I think its 83 or 84 but not 100% Frame and engine 29M00627 Cheers Neil PS anyone got a workshop/parts manual ;-)

Seen this on Ebay item no 8012647404 anyone know what is off description says its Montesa/honda .lookin for a TLM/314 Rear guard

Hi all When my '99 montesa is hot, at about a quarter on turn on the twist grip the engine starts running like its 'missing a beat'. As I said it only does this at a quarter turn on the twist grip any higher or lower it runs fine. What is wrong with it? Thanks in advance danny

Hey guys, Just fitted new tyres - and when putting the rear wheel back on i noticed that even with the bolts tight, if you grap the tyre and push/pull you get a minute amount of "play" - you can see that its around where those two metal rings that fit between the frame and the wheel itself. Is this normal or have i got a bearing on its way out? I assume you can get them fixed or is it a new wheel? Cheers Jza

I've never seen parts so hard to find online as the Montesa's I must say! I can't find an All Balls kit or anything. Hoping someone here knows the bearing numbers on the 4RTs for rear and front wheels, I think I found that they are 6004-2RS but says to double check your bearings first, before I go pulling anything apart does anybody know offhand?

Starting at the back with the refurbishment of my 315r, I replaced the rear wheel bearings and discovered I have 4 spokes missing....oooer! Can anyone tell me where I can find a wheelbuilder who can replace them for me. Tried Wildes at York, but he doesn't keep the Montesa spokes. Thanks Tommy

I’m sure somewhere in this forum is info on what I’m looking for. But so far no luck. I need info and places to buy wheel bearings and seals for my 72,73 Montesa Cota 247’s. I believe the rear bearing number part is 6204. I cant find the seal that covers the bearings. Mine are either gone or wore out. Any help would be much appreciated.

Hi can anyone measure the wheel offset for me? I am about to rebuild the wheels on my 98 mont 315 . I think mine is incorrect as the front spokes catch the rear of the brake caliper and no matter how I mount the silencer the tyre catches. The wheels were rebuilt by the previous keeper. A measurement from outside the disc on both wheels would do me. 2 steel rules ,one as a straight edge one to measure? From outside disc to widest part of rim? Also could anyone post pictures of spoke configerations? Cheers Dom

Hey guys....looking fur some info on wheels...i have a 05 4rt..just wondering if theres any other wheels out there that will fit 4rt...ie maybe the 315. ? Please let me know if ye think they woll or know thet defo will fit..thanks...john

HI My new 2008 4RT is arriving next week. I would like to update it with some fancy after market parts but were to buy these from? USA would be nice as the dollar is weak but any shop with parts is appreciated.

Hi all, I’m after a Scalvini exhaust for a 4 ride as I’m bored of the standard pipe. Would anyone know where is the best place to order from ? Thanks in advance , Andy

If there are any Canucks in the forum i am llooking for Elf transmission oil for my 315 . I live in Montreal and was wondering if there was anywhere close by? Thanks