Skip to content
View in the app

A better way to browse. Learn more.

Trials Central

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

guy53

Members
  • Joined

  • Last visited

Everything posted by guy53

  1. guy53 replied to badmotofo's topic in Yamaha
    You have to install the cable on the holder not attach to the arm. ( specialy when new ) Guy
  2. guy53 replied to guy53's topic in Yamaha
    Yes, but the heavier the the flyweel the slower the response on and off throttle, and you have to consider the position of the weight: the further out the more effect it as on the motor. With the heavy TY B flyweel, the throttle response is slow and it seem's to take forever to get down to idle speed. I think I have a picture off the A and B flywheel, I will try to find it and post it. Guy
  3. guy53 replied to guy53's topic in Yamaha
    David, I will keep your advice in mind. I should be able to make a good test ride this week end, so I will be alert to stalling. I have an unmodified A model apart my heavy B model flywheel so if the bike have a " stalling tendency " , I will go back to a standart weight A model flyweel and see if the rider isn't the cause of the bike behavior. I also try to ride without the clutch. Guy
  4. guy53 replied to guy53's topic in Yamaha
    I don't know about the rest of the world, but here in Canada, the B model was sold in 1975 and the weight added to the flywheel is twice as thick and larger than than A model. I run a weightless A flywheel on my B , and I went for 3.4mm advance. the bike start and run well ( in the backyard ) but I did not have the chance to try it properly. If I went wrong, don't be affraid to point it out, I would be happy to read your input. Guy
  5. guy53 replied to guy53's topic in Yamaha
    Humm !!! Decision decision... Thank you
  6. guy53 posted a topic in Yamaha
    I know I read it somewhere but I did not find it: I am installing new points and condenser on my TY B, I normaly set them to 3.1mm BTDC as per my Yamaha service manual ( A model ) but I remember that many don't set them at that BTDC. What is your input on that ? Thank you Guy
  7. For piston, there is nothing like the original. Guy
  8. I think it's a lot more usefull to be engenius than to have an engeneer ring. Guy
  9. I realy would like to se a picture of the complete bike. Guy
  10. They are standard TY A rods, many modif can be done, I went for cartridge emulaor. I like them, but I am sure that some other owners will give you cheaper tips. Guy
  11. guy53 replied to power175's topic in Yamaha
    It does not run well: it make a little noise but does not smoke. Guy
  12. 10W30 for me Guy
  13. Do I get this right. The clutch slip going downhill : the motor does not pick up rev but the speed increase ? Guy
  14. guy53 replied to wobblieb40man's topic in Yamaha
    I David, do you run your modified TY with a very soft front end ? At first I ran a harder setup and was alsways in trrouble in rocky sections. Since I installed the cartridge emulator and set them up so they are very soft, it is a lot easier to ride the rocky sections, but at the same time, I noticed that with a little more weight on the front end, the steering was better in moderate climb. Maybe half or tree quater of an inch longer swingarm would make it better. Guy
  15. guy53 replied to wobblieb40man's topic in Yamaha
    I gess it as, but, with the footrest lowered, it as to compensate. Plus the change of the position of the top shock mount and there lenght also change the fork rake witch make it, in my opinion ( might not be the best ) easier to ride. I live in Québec, no other Ty that I know were modified to these specs, but I still have a standard TY and even if I am NOT an expert ( lot of weight on the NOT ) I can tell you as I commented in an other post : yes it's worth the trouble to make the mod. Guy
  16. The best one is the one you enjoy riding Guy
  17. guy53 replied to wobblieb40man's topic in Yamaha
    I did the same mod on my TY B 2 years ago, I realy do like the bike now. With the motor raised an inch I change the footpegs position and put longer shock. I never regretted it. Guy
  18. guy53 replied to jockster's topic in Yamaha
    A clean exhaust, good timming and a rebore with a genuine piston ( at least a 2 ring piston ) to factory spec. is ok, for a little more punch you can play with he flywheel weight. That what I did to 2 ( an A and a B model ) and it work ok for me. Guy
  19. When I reposition the shock on my B model, I already had a pair of NJB trial expert 340 mm on the bike. I also lift the motor one inch . I have to tell you that I am not an expert rider, but an experience one. First thing I notice is: the steering felt better, second: when I tune the shock properly , the bike feelt smoother. The front end angle as changed a bit due to the lifting of the rear, and the longer travel of the rear wheel made it smoother. I can't tell you it made a better rider out of me, but I can tell you it made a happier one. On the one I am riding now ( B model ) I positioned the shock mount 11 1/2 inch from the center of the swingarm pivot, and the one I am bulding now 11 1/4 inch. If my brother was to buy a TY, I would tell im to first: reposition the footrest and second reposition the shock mount, so ... Guy
  20. guy53 replied to ksmith's topic in Yamaha
    I would be curious to know the stroke on both. Guy
  21. Best way for me is: using a rattle gun with the fork assembled, I give i a couple of shot to '' unlock '' the buttom allen without completely removing it, and than, I strip it . It alway's work. Guy
  22. Those comments are not very encouraging but as Yoda said '' Happy you will be when result is good, patience my friend '' Or was it someone else that said that. Guy
  23. guy53 replied to evansm's topic in Yamaha
    I took the flywheel off my TY 250 after a few rides on it , I was a little afraid that I would loose traction easily in muddy section, but with the tire and suspension that are avalable now, I never had any problem . I'm not a top rider and my throttle control is not the best, but I never considered replacing the no-weight flywheel with the spare one I bought just in case. Guy
  24. Have a look at the wrist pin eight before buiyng. Guy
  25. I had a TY Mono 250 ( with my 2 TS ) that I refresh with new 2nd o/s rings, when looking for those ring I found out rods rings and piston where very rare. So in my '' quest '' for ring I found a 3rd os piston and ring set at 220.00$ US.One and a half time the price of a genuine Yamaha TS piston I bought it. The original piston have close port as the one on the web site have open ones, according to Mick And.. they work very well but wear faster. If you want a picture of the original piston, pm me. Guy

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.