b40rt

Hi Reginald In Motion could give you the rate I'm sure, your tall so them being to hard would'nt be a problem. The springs are not specific to Marzzocci I don't think, just 35mm forks. I'm also using ATF for the same reason, and according to a chart I saw should equate to approx 7wt, though ambient temp must place a part so you should be fine, I find them very supple. Ross

Depends whats connected to the hand !

I got a new pair of fork springs from In Motion Bultaco as no one else seemed able to supply, and they were half the price. Tried them with 200ml of oil but although much better, were topping out occasionally. Went back to 220 and cant fault them. Surprised just how much better they are. Thanks for the help / suggestions. Ross

Have you tried Rockshocks ? Would be interested in a comparison with your new Maxton's once they have bedded in and you can form an opinion.

Are you going to enter against standard twin shock/fork bikes in trials ? Or as a special ?

GB should be part of the engine number to make it an army bike, mine is B40GB***. Hope this is some help. Ross

Really enjoyed the trial, cracking weather on the Sunday, and pretty good most of Saturday. Good run round on both days with a variety of sections/routes, what more can you ask for. The "liaison" burn section was fun! Ross

Hi Willie Thought it was you. Not alot more of interest,just the usual service intervals & such. Ross

According to the owners manual for a TXR-240 M Max jet 90 Min jet 58 Atomizer BN 266 Needle 3rd from top gas valve 50 air screw 1/4 rotation starting jet 65 float 8.3 gr timing 2.5 - 2.4 before TDC

Might be worth changing the wrist pin as well if they are not to expensive. Also the retaining clips.

Thanks for posting. Ross

http://davestestsandarticles.weebly.com/swm.html

Sadly David Page (missing from the list) died at a very young age.

Agree totally.

Sorry to have missed you, I could have recommended some festival shows for you. I think you would have enjoyed the "Lady Boys of Bangkok" right up your alley. Personally I stick to the Book Festal myself,was chatting to Irvine Welsh about his new novel set in the N E of England, Wayne Spotting. Just need to get currency organised for my trip, whats the exchange rate at the moment, it was 500 bic pens to the Scotchenese pound (which is legal tender, ask Michael McIntyre) I've also got some shiny beads, used baco foil, and broken casio calculators. Ross (6.32 am ? all night effort eh!) Sorry about this swazi_matt, but you must have a whole lot of stereo typical thinly disguised banter you could add ?

Are the 2012 ones not out yet ?

Sorry to hi-jack this intro, but I'm venturing over the border in the next couple of weeks and need to get my inoculations up to date. Diphtheria, Yellow Fever, Hepatitis A B C, Bulls41teitus A-Z. Anything else required ? Thanks Ross

No, he's just weird, welcome to "Waynes World"

nice knowing you !

http://www.trialsbits.co.uk/product_info.php?cPath=88&products_id=466

I would take the spindle to an Ironmonger and ask them to match a nut to fit. Most of them will give you the nut (up here anyway)