Pre-65 Bikes

Hi I have a 1958 Cub with what I believe are the original hub, spindle, spacers into heavyweight forks. There is a gap that I'm questioning on the opposite side to the drum. Am I missing a spacer? Should the hub pull through further when I tighten the nut on the drum up? Or does it just have a gap!?

hi all , does anyone know if the cub gear box is the same as a bsa c15? as in can i use the lay shaft ect ? cheers kev

What size taper roller bearing do you guys use for villiers services yokes, they did not have any and meriden is out of stock as well?

Hi, Does anyone know what sort of job it is to kick out the RH seat unit tube to take an inside frame exhaust? Many Thanks

Does anybody know who supplies Cub hub brake cams, preferably splined. With arms to match. Thanks Ross

does anyone know where you can buy alloy brake plates for standard Tiger Cub hubs ? and do they make the hubs work any better. Bruce

I

Does anyone know what grade aluminium is used for replica cub hubs? I’ve got a bit of 6082 and was thinking of make a pair

hello, i'm building a tiger cub and i'm looking for wheels and forks where can i get hubs (alloys) or what do i need to do to improve the stock hubs (i heard i should make the back hub wider) i have a aprilia mono fork (35mm) i would like to modify so it looks pre 65 who are the enginiers that can do something like that anyone has contact data from them ( email or phone ? ) kind regards bob

http://s362.photobucket.com/albums/oo70/B4...=BSAHUBS004.jpg Rear hub has the chunk out it, but front is going the same way. Cast iron I believe, is there any way to repair ?

Hi, I'm looking to replace my old pvl ignition (which I need for another project) with a digital system,not sure what to replace it with , electrex or pvl, I have crank case posts so fitting is not an issue.

I have been watching my Christmas pressie DVD of the 63 Scottish and at a minute and nine seconds in there is a London registered Cub with a frame I don't recognise, what appears to be an alloy silencer and suspension that seems to be about ten years or more ahead of its time - let's say it would attract comment if it turned up at some of today's pre'65 trials and probably be rejected. Many of you will have this DVD and some the event programme. Does anyone know anything about the bike and its rider?

how long should these be to properly mount the ignition, either pvl or electrixworld thanks

Anybody know of availability of spline kickstart shaft for Triumph Cub, cotter pin type in bike already Vinnie

Anbody any idea where i can get White Cub back mud Guard, on the stile of the Bultaco, but full lenght, Vinnie

Anyone able to recommend an engine oil for a rebuilt trials Cub ? Silkolene Chatsworth 30 has been suggested by another Pre-65er. But its proving difficult to get hold of.

http://cgi.ebay.co.uk/1962-TRIUMPH-Tiger-c...A1%7C240%3A1318

Hi all, Having managed to oil up NGK B6HS at a rate of roughly 1 per trial, would it do any harm trying a slightly hotter NGK B5HS? I won't be riding the bike on the road! Does anyone else use these in their Cub? Bruce.

Wanted a Project Cub can be in boxes Vinnie

Can anyone help????? I purchased a cub frame which was supposedly fitted with a wide swinging arm..... However I'm begining to wonder if it is.... Does anyone know the actual width of a standard cub S/A or a standard cub wide S/A so I can check which I have.... I dont want to modify it if it is a wide one as I'm building a stock looking trial's cub with correct steel tank's fork's etc rather than a trick one...... Pete