Everything posted by guy53
-
Where does it come from ?
Disaster: Just for fun I took the piston from the connecting rod, top bearing is done and yep the rod is corroded too, so crank job. I always use Shell Ultra that is suppose to be ethanol free. The transmission side is just as new, but the crankshaft side is very dirty with what look like rust mix with oil. There as been big change in temperature in the last few month especially in the period I was out of town, but I would have never believe that it could such damage. When I change the oil in the transmission I only ran it for a few minutes, probably long enough to '' spread the disease ''. Guy
-
TY250 A points setting
Scot I never heard about replacing the coil the way you did. Please give us feed back. I normally take the lighting coil out, if I can use them as replacement, I'll be more careful in storing them. Guy
-
Where does it come from ?
Now that my blood pressure is back to normal, I'm going to have a good look this evening, from what I can see with the cylinder off, only the part below the exhaust port is pitted. Guy
-
Where does it come from ?
Nope, always clean it dry ( with a rag. Guy
-
Where does it come from ?
Yesterday I took my B model out to make the final prep for today's friendly competition. I could not crank it, jerk it front and back it did not seem to be stuck, so I tought that the crank was the problem. After all it did start great about 3 weeks ago when I changed the transmission oil. After removing the side cover, everything looked ok, and I could not find the cause of my problem, took the clutch out, all the separate gear where free appart from the one on the end of the crankshaft. Than with the sparkplug out I tried to turn the motor: horror it WAS stuck. So head and cylinder off ( it was not stuck too hard ) I found water in the base, enough that the bottom of the cylinder is pitted. There was no water in the oil of the transmission ( I was not surprise by that ). It had good compression, no leak between the base and cylinder and the gas that I use is always fresh and clean. So where does that water came from, the only way it could get in the base is by the exhaust witch is in my opinion improbable. The exhaust would have to be full of water. Any idea ? Guy
-
Ty250 Gearbox Oil
Read the Beta clutch fix by dan William ( in the Beta section ) it does apply and it's worth the effort. Guy
-
Best ever 35mm forks
The best are the one that are well tuned. Guy
-
TY175 Clutch Lever extension?
I made an extension for my 250 ( not off the shelf ) a few years back, and I did not felt such a difference, even if I oiled the cable until I followed JonV8 advise. I replace the cable with a new Venhill and oiled it with WD40 every ride. At our last TS meeting a few friend tried the clutch and the general comment was it's almost as light as a modern bike clutch. Guy
-
Bleeding the #$@%$ rear brake
There is a kind of vacuum that suck the brake fluid from the '' thank '' through the bleeder, maybe that could help. Guy
-
Best shocks
And also the shock work the fork, a poorly setup front end won't give you the ride you are looking for, even if you have the best shock. Guy
-
Polishing ali castings?
That's the glass bead ! Guy
-
Clutch Hand Issues
I use to get cramp in the wrist and lose strength in both arm and hand. I did not change diet did not do any super exercise, I just realised that I did not relax enough. It did miracle for me. Guy
-
Beta Rev 3 carb leaking please help.
I'm no expert but, it almost seems like the gas is '' force '' out of the carb. Does it leak when the motor is not running ? Guy
-
Trimming the back mudguard loop - worth it?
I know one person that would tell you to cut it, and he knows quite a bit on them. Is first name is Mick, but I did not follow is advice on that. Guy
-
Beta Evo side stand annoying
I'd love to have one for my Rev Guy
-
Beta Evo 250 2014 sluggish throttle response
The fact that it is slow to return to idle point you in another direction, air leak ? Guy
-
2003 Rev Rear Mudgard
Reggie, you where right, after a few phone calls and a visit to Stephen's place, I have on the shelf a brand new genuine rear 2003 mudguard. It even came with the stickers. Guy
-
By the way
By the way, if I ear anybody complain about the weather in there area, there will be verbal retaliation ! I woke up this morning to find 5 more inch of snow on top of the 29 that we had last week. Guy
-
Gloves or No Gloves?
Back in the days ( the early 70's ), yes yes, I'm that old, if you where serious about trial, you needed boots. Helmet was for beginner and if you where really serious, you had to wear glove. I was in a group that '' thought '' they where really serious, so glove ever since and it does not feel right if I don't. Of course I learned since then, I force myself to wear '' some protection '' on my head. Guy
-
Footrest mod ty250a done
The first time I repositioned mine , I lowered them 1 1/4 inch and also back 1 1/4 inch. I'm 5' 8'', since than I modified 2 other TY and did the same, they feel right for me. First few ride, I mostly notice the lower position but I felt it did not made such a big difference. It's only when I swap bike with a friend who wanted to try mine that I really felt the difference. I kept the TY footrest and made them wider and longer, but the back plate look very similar to yours. Guy
-
rev 3 270 coolant change
Yes the one with the copper washer. Guy
-
Gas mix
axulsuv do you run straight 100 LL mix 75 / 1, or do you mix regular gas with the avgas ? Guy
-
Gas mix
Dan Williams, here In southern Quebec, we where about ready to ride 3 weeks ago, now snow, ice storm and more snow, so maybe in a month and a half. Guy
-
Gas mix
I mix Premiun ( 92 octane no ethanol ) gas 3/4 and VP racing gas 1/4 with Klotz Techniplate 75 / 1 to run in my 03 250 Beta Rev. I was to buy a 20 liter jug of VP for the season before I started to read on the product. I was always told the stuff would keep forever and it seems to be wrong, it only stay fresh in certain conditions. I want to try avgas mix with auto gas any of you tried that. Please don't reply with chemical formula. Guy
- Ty won't run