Everything posted by zerorev3rev4
-
Competition Trials
pretty much all year
-
1997 315R Power Delivery Question
Has it got a flywheel weight fitted
-
My First Trial On Sunday!
make a list , a pump can be handy , some grub and juice as you can get quite hungry , dont expect to win it, basic tools , wd40 spare levers maybe , ,, always walk sections be sure how many laps and sections , find out which flags you follow always confirm beginning and end flags , good rear tyre if likely to be slipy work on balance tight turns whilst slipping clutch with rear brake on ,dont forget not to stop and one dab is better than a five
-
Fantic Air Cooled
some clubs have a mono class it is growing but wont take over twinshock
-
Show Us Your Montesa!
very nice job pal
- Ty250 Rebore/porting
-
Bikes Weight
Do you not need a brake light now .would not like to think vehicles behind got no warning of a bike stopping ahead just asking for trouble
-
'08 Rev4 Carburator
there should be a mixture screw on the front of carb underneath engine side , i think i got an adjuster screw by jitsei to enable it to be adjusted by hand , i would go up on the main jet as they seem lean from factory
-
Goldentyre Gt255?
you get what you pay for
-
Yamaha Ty250 New Carb Problem
you need to determine whether rich or lean , the choke not helping makes you think its too rich already if this is the case you should find the plug black and wet ( causing miss firing and duffing plug ) and possibly black wet from exhaust ,, if its lean the plug would be clean and grey or whiteish the engine would run hot and possibly pink ( abnormal knock ) if you cant determine which it is then you best buy some jets larger and smaller and try them and see which one improves the problem its only a case of jetting the carb to the engine to make it run right as long as the carb size isnt way different
-
New Rider
if you used to have a honda 4t then you could get yourself a 4rt with 2k as they do come up on ebay for that kind of money , or would get a gasser you would get a much later 2t for your money old scorpas were good reliable bikes cant comment on the later with sherco engine
-
Show Us Your Montesa!
bought a cota200 3 years ago to do some twinshock events then bought a few more to do up and move on also to gain more spares as some came with parts then started looking at 242,s for a bit of extra power heres one just picked up
-
Show Us Your Montesa!
-
Yamaha Ty250 New Carb Problem
might after try a smaller main jet , you could try one from your old carb
-
Yamaha Ty250 New Carb Problem
does it rev up with choke on
-
Help Please From The Land Of Kiwi
someone has mentioned these before in 09 in the honda forum its basicly a 314 2t restickered japan model , ( i think )
-
Help Please From The Land Of Kiwi
you have a 314 2 stroke ? or a tlr 4 stroke ?
-
Recommandation Depending Plug For Tr 34
i would personally never use a r ( resistor type ) plug ,, is timing set correct ? also 2nd it sounding rich as using a lot of fuel is muffler blocked or air restriction to air box also is compression good
-
Another Reflex Question...
should be able to pipe straight to the air box if it has no other function
-
Beta Rev 3 2008 Gearbox Oil.
also use atf with no probs
-
Keihin Carb.ty.250 Mono
might just be trial and error work your way up on the main until its rich then come down until it runs right , where is it lacking
-
Fantic Tx 250 125 Twinshock Rear Wheel
an alloy tube would be best front be didfernt you allways need a tube inbetween
-
Fantic Tx 250 125 Twinshock Rear Wheel
you need a spacer tube inside the hub inbetween the bearing centres , not sure if nylon ones were ever used
-
Jtx 270 Struggle To Downchange
sounds like return spring broken or not working
- Rebuild Is Finished