chris morris

after you've worn your boots a few times you'll see where the boots are going to wear through first. i bought some shoe goofrom ebay and neately put it over the parts on my boots that are going to wear, its a liquid rubber. I used to use it in my bmxing and skateboarding days. You can get it in clear or black. Apply a few layers over a couple of weeks as it takes 72 hours to dry completely, once its nearly worn through this reapply and you never get holes in your boots.

Just found this bike on ebay. below is a nice and cheap beta gara 250 looks in ok condition but as it says non runner due to overheating problem. new riders grab a bargain beta gara

i'll be there + 5 others i think

here you go beta parts lists

get to your local tesco, this can be fed from a barrel. and its portable so you can wash your bike before you get home and your wife wont go ape for getting mud on the driveway. tesco pressure washer

no not these games but, dougie lampkin nokia game and also here

anyway, Who`s going to hawkstone this year. Anyone camping out. going to try not to drink too much on saturday night and miss most of sunday this year. ANDY are trials central going to have a gathering at the end of the night after max and paddy security ltd. shut the bar early. Please please please can we see another fine performance from the prat who decided to push the portaloo over with his mate in side only to find out there was a scooby parked behind it. hawkstone

i got stopped by the plod too, had a number plate made up with "illeagel font" on it?????? not sure what they where on about, everyone understands wingdings dont they? anyway after pleading and saying atleast i`m using a light board they let me off and told me to get a proper no. plate

i use a kliponoff rack that i`ve always thought was adequate. galvanised is better than the chem blackened one. think it cost 65 squid kliponoff

these are pads you need galfer are probably the best you can get galfer front pads galfer rear pads ring round your local motorbike shops and see if they can supply you them or try galfer usa

i have a 05 beta and that p****d petrol out for ages so finally i decided to do the carb mod. heres a pic of the mod also look here r2w carb info

if you can get the frame number have a look on here beta frame numbers

go for the SKF 6004HQ, they are 6004 2rs, they're probably better quality than the ones below

yes they are 6004 2rs, repack them with waterproof grease before installing them, go for the nsk/skf ones as some of the others are cheap and wont last. 6004 2rs spec

Found a TY 125 model on ebay TY model

Here is a partslist for the 98 techno 98 techno also this is where is look for my bearings INA bearings

The uk beta ones are here. Beta frame numbers or ring john or gary they`ll tell you. Telephone (+44) (0) 1535 655970 Just down the road from you it appears

there are some partslists here. gas gas parts lists I use a castrol waterproof grease. its like treacle. once it on its hard to get off. i also use it to repack my wheel bearings.

if its leaking between the tyre and rim, then you probably got a damaged bead on that tyre, the manufactures would replace your tyre if its faulty im sure??

I have the deutz engine screen saver. It gets on your nerves after a while. Here`s a great site with loads of animated mechanical explanations on. How Stuff Works

Does anybody Know where to get the pre-formed packing for my 05 rev3 rear silencer? Its been mentioned in a few previous topics. Could re-pack with the normal loose stuff, but, its always been abit of a ball ache.

I had a 98 tx250 so heres some measures; Fork oil : 7.5 weight 330ml in each leg Radiator : 500ml pure coolant Gearbox oil : 10w40, 650ml Swingarm bearings : Hk1520 2rs Also if i remember rightly there is no specific filler you have to remove the spy glass and fill it through the spy glass hole.

Place some rubber washers on the rivets between your fork brace and mudgard, I`ve got an 05 270 and haven`t broke one yet, you maybe just unlucky.