| |
-
after you've worn your boots a few times you'll see where the boots are going to wear through first.
i bought some shoe goofrom ebay and neately put it over the parts on my boots that are going to wear, its a liquid rubber. I used to use it in my bmxing and skateboarding days. You can get it in clear or black. Apply a few layers over a couple of weeks as it takes 72 hours to dry completely, once its nearly worn through this reapply and you never get holes in your boots.
-
Just found this bike on ebay.
below is a nice and cheap beta gara 250
looks in ok condition but as it says non runner due to overheating problem.
new riders grab a bargain
beta gara
-
i'll be there + 5 others i think
-
here you go
beta parts lists
-
get to your local tesco, this can be fed from a barrel. and its portable
so you can wash your bike before you get home and your wife wont go ape for getting mud on the driveway.
tesco pressure washer
-
no not these games but,
dougie lampkin nokia game
and also here
-
anyway,
Who`s going to hawkstone this year.
Anyone camping out.
going to try not to drink too much on saturday night and miss most of sunday this year.
ANDY are trials central going to have a gathering at the end of the night after max and paddy security ltd. shut the bar early.
Please please please can we see another fine performance from the prat who decided to push the portaloo over with his mate in side only to find out there was a scooby parked behind it.
hawkstone
-
i got stopped by the plod too,
had a number plate made up with "illeagel font" on it??????
not sure what they where on about, everyone understands wingdings dont they?
anyway after pleading and saying atleast i`m using a light board they let me off and told me to get a proper no. plate
-
-
i use a kliponoff rack that i`ve always thought was adequate.
galvanised is better than the chem blackened one.
think it cost 65 squid
kliponoff
-
these are pads you need
galfer are probably the best you can get
galfer front pads
galfer rear pads
ring round your local motorbike shops and see if they can supply you them
or try
galfer usa
-
-
i have a 05 beta and that p****d petrol out for ages so finally i decided to do the carb mod.
heres a pic of the mod
also look here r2w carb info
-
if you can get the frame number have a look on here
beta frame numbers
-
go for the SKF 6004HQ, they are 6004 2rs, they're probably better quality than the ones below
-
yes they are 6004 2rs, repack them with waterproof grease before installing them, go for the nsk/skf ones as some of the others are cheap and wont last.
6004 2rs spec
-
Found a TY 125 model on ebay
TY model
-
Here is a partslist for the 98 techno
98 techno
also this is where is look for my bearings INA bearings
-
The uk beta ones are here.
Beta frame numbers
or ring john or gary they`ll tell you.
Telephone
(+44) (0) 1535 655970
Just down the road from you it appears
-
there are some partslists here.
gas gas parts lists
I use a castrol waterproof grease. its like treacle. once it on its hard to get off. i also use it to repack my wheel bearings.
-
if its leaking between the tyre and rim, then you probably got a damaged bead on that tyre, the manufactures would replace your tyre if its faulty im sure??
-
I have the deutz engine screen saver. It gets on your nerves after a while.
Here`s a great site with loads of animated mechanical explanations on.
How Stuff Works
-
Does anybody Know where to get the pre-formed packing for my 05 rev3 rear silencer?
Its been mentioned in a few previous topics.
Could re-pack with the normal loose stuff, but, its always been abit of a ball ache.
-
I had a 98 tx250 so heres some measures;
Fork oil : 7.5 weight 330ml in each leg
Radiator : 500ml pure coolant
Gearbox oil : 10w40, 650ml
Swingarm bearings : Hk1520 2rs
Also if i remember rightly there is no specific filler you have to remove the spy glass and fill it through the spy glass hole.
-
Place some rubber washers on the rivets between your fork brace and mudgard, I`ve got an 05 270 and haven`t broke one yet, you maybe just unlucky.
|
|
