Jump to content

hrcmonty

Members
  • Posts

    199
  • Joined

  • Last visited

Everything posted by hrcmonty
 
 
  1. http://www.trialsuk.co.uk/how2s trials UK, Site SPonsor has loads of How 2 Videos. Chain tension is one of them ;-) Enjoy.
  2. Nooooooooo, It's wrong on so many levels! I'm sure that the price of a tyre is far more than a few Dollars of Fuel for the Truck! a Rear Tyre is knackered after a few days during the Scottish 6 days, if not sooner. Due to the Road work So you must go through them in no time if you plan on doing that. Nice idea, but i really wouldn't do it.
  3. Oooo Flag Shy. Ok so years ago, i used to do Archery and for Yorkshire, but early on my coach and i realised i was 'Gold Shy' Gold being the centre of the traget. So what we did, was to over time fold the target down bit by bit to take the other colours away, so after a bit of time, all i had to shoot at was the centre of the target! Forcing my mind to get over the easier options. So to your point, and most others in Trials, with no flags you feel like a pro, and go up anything. Thats because you have infinite options of Lines! So Set some sections out with Really Wide gates, this will give you lots of room for error whilst getting used to the flags. Then over time, reduce the size of the gate. Hopefully you can see what i'm getting at with the 2 stories?
  4. hrcmonty

    Xispa Air Box ?

    Blunt answer is it an Xispa, don't expect things like that. So where the big hole is, there should be some Gauze across it. If you think that the holes within that are too large, get down to morrisons and buy a cheapo seive, the wire mesh type. Cut it up and bond it to the plastic. This obviously won't stop water, but it'll stop larger parts of mud. As for water, if it hasn't got a drain plug in the bottom of the airbox, maybe put one in. Small splashes of water etc arn't too bad, if your filter is well oiled.
  5. hrcmonty

    Xispa Air Box ?

    Hi Warren, I'm going to answer, but i don't know if this a Joke thread. If it isn't please don't be offended. From your avatar you ride a TxT Pro? Your air intake is also under a panel on the 'Seat' Plastics. As are most trials bikes. As for stopping mud and water getting in, thats not a massive problem, as you should have a well oiled air filter in there, and possibly a 'Drain' bung on the bottom of the air box. As for stopping water getting in, many people Duct tape around the panal.
  6. Correction, they haven't gone out to Dealers at all.
  7. I think there just what the guys have done as a 'Look what we can do' Project. They do look gorgeous though, Lets see how Woody gets on with them in the SSDT. I can't see why they wouldn't have them on the Public Market. I think the Master Cylinder assembly they've done has gone out to some dealers but i could be wrong.
  8. Is there a map of the route available?
  9. Agree with Chewy, For the majority of us you can do all sorts in practice. Stick some flags in and an observer and it all goes to sh*t haha. As for your original question, it's hard without seeing you ride! Going down hill, more front brake and bodyweight down slightly and slightly forward of centre. Gets some weight into the front tyre to grip. When your practicing, just practice going as slowly as possible keeping full control. Going up hill, again depends on terrain etc etc, practice practice practice, and get yourself to some schools. Does Jarvis still do them, i went to his and that was good.
  10. Intresting, how from 3 little scenarios we have 3 different ideas of scoring. Old Trials Fanatic, i fully agree with all your answers, this is too how i would have marked it.
  11. Intresting you put 2+3 as 'Out of Course. 2 never mentions anything about going out of course, just that he flattened the other courses flag. So this being the error or not depending who is observing. 3 mentions nearly going out of course, but he saves it and pulls the front end round, but the point is the flag is flattened but bounces back, so what would you mark for that?
  12. Lets see what people think, Your an observer so place what you think the mark is you would give to the following - Little Jonny brushes a flag with his foot, the flag has gone from perfectly upright, to now a slight lean. Leaning away from the section. = Big Mick is bouncing his front end around and flattens one of the other routes flags. = Nobby is riding the section, his tyre is heading out of the section, but he manages to stop and flick the front end around, in doing this he knocks the flag, of which flattens but then bounces back up. It dosen't bounce back up perfectly, but enough to not worry the observer getting up to reset it perfectly. = These are just some silly scenarios i've thought of. But if anyone has any real live times where the call to give someone was a penality or not, get it put on this thread, and lets see what people would do.
  13. Well BTC has gone to TSR22B, And no minders! 2012 could be an intresting year.
  14. So, urm... Whats weather like this weekend? Anybody?
  15. Yeah i've just tried registering, and it says my Details can't be found on the database? Yet i have a 2011 Licence, and i get post and E-mails through. Figure that out then.
  16. Looks superb, Certainly got a little bit of every current Trials bike in it! Rear shock location.... Hmmm, Yeah Like it, can't see anything wrong with it there, It's away from direct mud and water from the rear wheel. How would it take upto a rock slammed into??? GasGas249 will tell us when his comes! Will there be Flex on the swingarm from the Shock being side mounted?
  17. The Oset has a brillant distribution base in the UK, and superb customer service. Take a look at trials uk web site. They have just posted a video of the Oset cup run by Yeadon and Guiseley. http://www.trialsuk.co.uk/
  18. There are some good how 2's on Trials UK's web site. http://www.trialsuk.co.uk/how2s
  19. I heard he had been approached by Carol Sandiford, to ride the new electric Mecatecno. Or that he'd been asked by NASA to join the shuttle programme. One of them MUST be true!!!!!!!!!!!!!!!!
  20. hrcmonty

    evo ohlins

    Fair Doooooooooooooooooooooooooooooos
  21. hrcmonty

    evo ohlins

    Does this post from Splatshop follow Forum Rules? ADVERTISING OF ANY NATURE IS PROHIBITED ON THESE FORUMS. Messages advertising items, products, companies or services with the intent of financial gain by the poster will be deleted and the user permanently banned with no further warning. This rule is firmly enforced and we WILL find you out if you try to get round our rules... This also applies to Wanted Ads because as soon as somebody replies to your Wanted Ad they are in breach of our selling terms and face being banned. DO NOT post "Is anybody selling..." or "Does anybody have..." type posts.
  22. hrcmonty

    evo ohlins

    I was in there yesterday, and i'm sure i saw one in the cabinet.
  23. 1- If you haven't done it before, take pics of each step, so you remember where washers went, or which way round Dust seals went. 2- To push the Bearings out, Get a Socket that sits on the Link itself, and is big enough to allow the bearing to enter it. And then a socket that sits on the outer bearing race, but is small enough bore to fit inside the Link. you should see what your trying to achieve by now. If you have a Vice, then set it up as above and press the bearings out. This also works for pressing the bearings back in. If you don't have a vice, ive simply hammered them out as above. Really make sure before you start, that the Socket Pushing the Bearing out, is not too big or caught on the Ali body of the link, or else you will damage it. Hopefully this all makes sense over Text!
  24. Or your not on facebook!!!! So spill the beans. What IS on this Facebok?
 
×
  • Create New...