SWM

Here's my Jumbo project. I bought it as an unfinished project. It's slowly coming together. The tank was as knackered as you'd expect of a 30 year old bike, found a guy who polishes them up and he did a fantastic job, Now I need to make up some badges. Thinking of doing it in CAD and having them printed. If any one could provide straight on pictures of the right and left badges I'd much appreciate it. I'm happy to share the CAD file when done to anyone interested

My riding partner just picked up a 1984 240 and needs a kick stand. Any ideas where he could find one? thanks Herman

Hello, I'm Xavi from Barcelona, I have a SWM 320TL NW from 1982, I just put a Climber motor and now I'm looking for an aluminum swingarm model 1983. Could you help me locate one?, I contacted Martin but a long time ago that you do not have any… Thanks a lot

Could someone please tell me what this thread size should be, my Jumbo currently has an unsightly M12 x 1.5 hex head bolt and nut fitted which will only screw in about 10 mm before it meets resistance. It's been messed up by a previous owner as the thread in the head looks awful, I would just like to return the thread to what it was originally either by re-tapping or helicoiling and then fitting a suitable socket head bolt to block it off. A couple of pics attached, Cheers.

Hi, has anybody got a readable wiring diagram for a TLNW 125 they can let me have a copy of ? Everything I've found so far is of low quality and unreadable. Thanks in advance, Phil

Hi does anyone know if you can get an alloy gear changer for an SWM , or if one from a modern bike will fit, many thanks.

After looking around for a good while for a replacement exhaust manifold for my 81 TL320NW, I found that most of what was on offer was in worse condition to the one I wanted to replace. Then a notification popped up on FB for some new stainless ones on offer. I ordered one, it arrived yesterday, I fitted it today, perfect.

Anybody with a Jumbo when your next playing around with it in the shed, could you take some rough measurements for me please. Mainly the rear axle spacer #17 as per below pic, mine measures 32 mm, I'm trying to determine why my left rear shock splays out slightly towards the bottom shock mount whilst the right appears near perpendicular, also when I measure the shocks from centre to centre across the top mounts I get 233 mm but at the bottom I get 245 mm so definitely some 10 - 12 mm of splaying but I don't know if this is normal for a Jumbo. If it is normal, like a Cota 349/4 for instance, I'm curious why the left shock seems to be doing all the splaying ?

My betor forks are making a loud bang when lifting the front end . I have stripped the forks down and see no problem any help would be appreciated

Finally started to pull apart my 81 PECO 200 SWM . Not many of these were made, Not even sure if any others have survived out there. It was a small company called "Performance Equip CO" here in the UK that modified the std 125 SWM trials , I believe 6 were made, but some of this is just folklore, would love to hear more snippets about the history of these if anyone really knows .. Any way I've owned it from Circa 1985, Although my memorys not as good as it was, and apologies in advance for the fuzzy photos. And Yes it was a black frame model when it was first made... As I'm going to restore it I thought I'd put up some pictures…

AS clutches are a major talking point on the Forum, AND i was a bit bored last night !!.. thought i'd do some measurements of the Clutch lever actuation while my 320 is stripped down. ( Excuse the slightly blurred pics and the Dirt in the casings !!.) These are just for Information , as I'd not seen these measurements stated (So hope this helps anyone in some way ) .. And they're from a pretty worn engine, but I expect them to be reasonably accurate. (is that enough disclaimers !!)

Well, Speedy has gone off to pastures new. I'd like to thank all on here whom have helped in the past when I've had queries or needed helped, when I was but a rookie SWM owner and not the Uber Anorak Owner I later became. Martin at Moto SWM needs thanking too, like Dave at BikeTech GasGas it's great when someones business is also their passion. Honestly getting parts was far easier than for my late Yamaha WRF's I've owned....chatting with some bored and spotty 16 year, who grunts when distracted from the smartphone is not a fantastic experience I'd like to share. cheers guys, all the best

Hi guys Hope someone can help us out with our newly acquired Speedy TL 320. There's a bolt plus a hex stud and after loosening said nut a little it seems not to want to tighten back in. The oil has been drained through hex stud and any recommendations for best oil and correct amount would also be appreciated. Photos below and thanks very much in anticipation for any info Cheers Zeb

To lower and move back the footpegs on a TL 320 seems to be the most done mod. What I've not seen is what mods have been done to the rear brake lever to be able to cover it while riding and standing on the pegs. Any pics of the mods made would be appreciated. I am going to try and get a lever made that will still use the original cable. I have a template made but need to get it fabricated if it is at all possible. It is a really wierd looking thing to say the least.

Any SWM / Rotax engine aficianados out there for some advice? I've recently acquired a very clean SWM 320TL which I suspect has had an easy life. The previous owner told me on collection that he thought it had picked up some sediment in the carb' having been sat for a couple of years, and I'd need to give it a good clean. I briefly ran it, and he was right, it was displaying the classic signs of a gummy carb and blocked pilot jet... it wouldn't run at low revs, needing choke to keep it alive as they dropped, though was okay at larger throttle openings. So, I fitted a new pilot jet, (a size 60, though I know some folk say a 65 is best) and cleaned the carb' including…

Went to start my TL320 the kickstart is not engaging i am only getting a clicking sound as it tries to engage. Does anybody have any ideas.what has failed.

I need help...where can I buy a rod kit? Also need info on piston size the 61.70 in this engine .... not sure if this is standard ?

I did find this Tl 320 and have to get it tough I haven't finish my TL 125 yet. Look the frame number!! It is also in registration papers 0001. Is this the first one?

i found this a while ago and have just got round to translating it, there are still a few headings that i couldnt figure out but it shouls be useful. https://www.dropbox.com/s/gps74puq7hs3pnl/SWM%20MODEL%20SPEC%20SHEET.xls?dl=0 hope it helps. matt

Hi all,new to this site and hope somebody can help. have a 1981/82 swm 240 whose spark keeps disappearing,have done the usual points condenser and stator coil behind flywheel,ignition coil and all associated wiring replaced with new items. the engine has had a few mods ported ,bored to 280cc barrel jacked and squish band altered to suit.flywheel skimmed as well so i am wondering if this is where the problem lies, if it is loosing its magnetism. has any one else had this problem? noted somebody has fitted an electronic ignition system to there swm(in this forum)does anybody have any more info on this?? also is the aprilia climber rotax engine electronic ignition…