Vertigo
215 topics in this forum
-
While cleaning the bike (Combat Ice Hell 250) a few weeks ago I noticed that the black plastic muffler cover was rubbing and damaging the fuel tank. When looking from the back of the bike: bottom left corner of the cover. And to prevent a leaking fuel tank I removed some material from the cover and glued a small piece of rubber (from an old inner tube) to the tank . Just checked and no further damage to the tank, so that's good.
-
-
- 5 replies
- 2k views
-
-
So I'm starting to notice that when the bike is warm, on starting it it wants to, and sometimes does, stall immediately after starting if you give it a bit of throttle. It acts like a lean bog from a carb bike. It seems to be less an issue if it gets a really good kick to restart it, and/or you immediately give it a blip as it's firing. Anyone else know what I'm talking about here, or am I special?
-
- 2 replies
- 1.7k views
-
-
Anybody know if they intend to produce a 125 if so when .... If not why not .....
-
- 2 replies
- 2.2k views
-
-
Anyone else's front mud guard rattle like the dickens whenever you moving quickly over rough ground/landing the front wheel/or otherwise doing something that causes it to shake? Sounds like it's the front tire rubbing, but I tried shimming it and that didn't make a difference. The next possibility would be side to side movement causing it to rattle against the mounting bracket, but I'm not 100% sure. If it is, I don't really see an obvious way to shut it up.
-
-
- 8 replies
- 2.6k views
-
-
Could someone take a peek at how much clearance they have between the chain tensioner bolt where it screws into the swingarm and the chain itself? Mine was rubbing, and I'm assuming I bent the tensioner, but I don't see any obvious damage.
-
- 2 replies
- 2.1k views
-
-
http://www.trialworld.es/vertigo-combat-fajardo-replica-300-2017/
-
-
- 11 replies
- 4.5k views
-
-
Just taken delivery of a new 250. Vertigo have got rid of the 9V battery. Bike was built Jan 2017. Apologies to existing owners, I forgot to ask if they can eliminate this on earlier bikes. Very pleased so far!
-
-
- 11 replies
- 7.4k views
-
-
Anyone had the linkage apart for greasing care to comment on how hard (or not) it is to get to everything? Were the bearings well greased from the factory? Anything else I should know before I tear into it?
-
- 5 replies
- 4.1k views
-
-
Got the 550 gram weight kit(Vertigo kit). Shifter hits the case. Any fixes out there or am I resorting to grinding down the shifter?
-
- 2 replies
- 3k views
-
-
So on the GG Racing models that ship now, they come with a bearing cup in the throttle side to prevent that bar-on-handlebar drag you'd get when doing anything where you're putting a lot of pressure on the grips. It's a nice feature, but if you want to keep it, you can't run bar ends. Curious if the Vertigo has anything like this on the throttle side?
-
- 2 replies
- 2.3k views
-
-
-
Do these bike run quieter, i.e. with less 'popping', if run on richer or leaner maps? Or does the bike always sound the same at or near idle? I ride around my property sometimes and a quiet bike is preferred:
-
-
- 15 replies
- 6.7k views
-
-
I've been set on a gasgas but currently considering a new vertigo 250, not ridden one before but have seen a few at local trials. They look awesome, I like the idea of fuel injection and the air filter positioning. From what i've read they look extremely well built and thought out. How do they ride in comparison to the big brands such as gas gas and beta etc? I get on really well with gassers, quite like sherco's but don't like the 3 usable gears as opposed to 4 however have never gelled with beta's. Also, how is maintenance and reliability? Not shy of working on the bike but don't want to be beholden to a dealer to plug it in like a modern car!
-
-
- 5 replies
- 10.2k views
-
-
-
-
- 11 replies
- 6.5k views
-
-
My new 250 ice hell arrived last week and I love it. Just notice it has Michelin X11s on it, would of thought it would come with X Lites?
-
- 3 replies
- 1.9k views
-
-
Anyone run leaded fuel in the vertigo? Is be a little concerned given all the sensors. I ask because it's difficult in my location to get ethanol free unleaded. The solution to this point has been to mix leaded race gas and ethanol pump gas to bring the ethanol down to 5%. If I can't run leaded in a vertigo (and I'd be inclined not to) I'd have to run it 10% ethanol pump gas.
-
-
- 5 replies
- 2.4k views
-
-
Ordered a 2017 300 Ice Hell, on the proviso that the test day at Birdlip Quarry goes well and i still want one after! This would only be my second ever brand new bike, so am quite excited! Now to see about selling the current stead!
-
-
- 2 replies
- 2.6k views
-
-
I know the early Vertigos had mapping issues which were sorted pretty quickly so if buying a second hand 17 ice hell, can I be sure the mapping is sorted? Cheers!
-
-
- 10 replies
- 6.6k views
-
-
So does anyone have any idea how people have ponied up for the top line titanium Vertigo? A friend of mine has ordered one which started the discussion as to whether he will be the 10th or 500th. Spencer
-
-
- 15 replies
- 7.7k views
-
-
Dibs is off to pastures new leaving a gap in the BTC field. If Dougie replaces him who do you think would be the natural choice. Jack Price is probably tied up by GasGas but there is Jack Sheppard who has shown the resilience and determination to continue riding despite a few bad years and has produced some good results at that level. Other prospect include The Peace's, Iwan Roberts and Toby Martin. Anybody else come to mind. Of course Fajardo could run in the BTC as well as the Spanish Championship and WTC but that might be asking a bit much!
-
-
- 11 replies
- 5.1k views
-