suzuki250

Just finished it, put a large patch on the rim seal. It currently seems to be holding 40psi quite well at the moment

I’ve got a slow puncher, it turns out the rim tape has a very small split where a spoke has damaged it! Anyone ever repaired a rim tape with a puncture repair kit?

how did you get on with the shop?

Thank you

Yes, you need to use a press.

What’s the diameter of the MP600 fork stations? Is it 32mm or 1.1/4”

How much are the Rockshocks?

it's looking good The only thing I would add is a rear sprocket guard (I saw someone lose some fingers when I was in the schoolboys!)

Two stroke timing retards as the revs are increased (Opposite to a 4t motor)

I've used a couple of pairs of NJB, and the seem pretty good

Looks like its missing gaskets between the manifold faces, or have you used instant gasket?

Looking at that manifold, I'd suspect an air leak!

You need deep pockets even for a mild modified bike, and its very time consuming! If you are on a budget a twinshock trials or pre65 that’s already done is your best bet

That's nothing. I was so skint once, I had to cook my chips in two stroke oil...

I think a motor vehicle is a fair description

Very much depends on the price?

That’s probably more to do with who bored it rather than the piston I never come across a piston that wears out after two trials no matter how cheap!

I've got one of those 'Gara Trial' tyres that I took off a bike many years ago, I might give it a try the next time I go practicing

What did pirelli change, was it the compound & block pattern?

I work in engineering , and qualified to say 'sh!t happens'. That’s why machine mart sells welders

there's some for sale on Ebay

Wan kin......

The do tend to crack easily, I think the material used is Toffee!

Nice bike