scot taco

I got the idea from somewhere to safety wire it so it can,t turn.Mine is an older (1970) plonker and it has the post between the cylinder fins that I tied to,not sure if the later ones are the same. As you can see I did a sloppy wiring job that needs tightening up so maybe it has not tried to come loose? Nice job on the bike!

Just a couple of pics of old faithful.It is bone stock except for the skid plate and always willing to go for a ride!

I agree with the carb mod and good brakes along with good tires and shocks and that is all that is needed. In mechanically sound condition it is a very good bike and is more than capable for AHRMA trials.

Thanks for the replies and you are correct Stuart.I t didn,t dawn on me until you mentioned it,but it should have because I found that out when I went to put an earlier model actuator shaft in my 199a.

Very nice 199a in the classified adds and it mentions that it had the clutch bearing mod done to it. I,m more curious than anything as I seem to have mine working pretty good,but does anyone know what this mod is?

I would have to vote for a late model 325 Bul,very easy to work on and get parts for and smooth torque.That being said my experience is limited to Buls,my Ty250 A,TL125 and a KT250 that was borrowed to me for one trial. I have ridden one Fantic but it was a liquid cooled Section that had been ported and was a real brute for my limited skills. I agree with the suspension and handling comments and think that it comes down to what kind of power delivery do you prefer.

It does seem to be a fuel delivery problem. Is it possible that the fuel cap is plugged up and not letting the tank vent causing it to run out of fuel? Sounds like you have covered about everything else,although I,d bin the Amal and try a mikuni.

Very nice looking MK3 bultacosd.

I was actually able to get out and ride it over the weekend although I did end up on the Ossa for most of the time because my brother was more at home on the Bul.

Tripp, I had to look twice to see who was riding your bike. No whiskers!

Dave, Those two Buls that you built are pretty cool! They are hard to beat because they are so easy to work on and you can mix and match a lot of different parts. After seeing the photos I recognize you and the MXer from the Hammer and Tongs site.It seems like you guys have a good vintage following out there. Thanks for the links.

Thanks for that John.The m10 Sherpa motor is rare as hens teeth here.The more I,ve thought about it the more I,m leaning towards keeping it what it is. If I could find an early Sherpa S tank and high pipe I would maybe put those on it just because I love the looks of those.

Thanks for the reply.I,m not sure which way I will go with this project just yet,but a replica Sherpa T is one thought.

I brought another one home.1967 Matador 4 speed.Not a trials bike and not real pretty,but I could not pass up the deal. Does anyone know how much difference there is in the transmission ratios between it and a 4 speed Sherpa T?

There are two 1973 models on ebay for sale right now here in the U.S..They both have high mount fenders and look to be very original with decent photos for good reference. Good luck and enjoy!

Jeremy,I can,t seem to find a definitive answer,but I did find these two pics that appear to be from brochures.If you are going to use it for trail riding I would go with a high mount.

Nice work,beautiful bike Larry!

Thank you matt !

If it helps,I have ran a couple of Wiseco pistons in my Pursang over the years with no problems.

Sounds good bondy,I can never look at too many Ossas! Thanks.

Very cool bondy.It will be interesting to see how you like it compared to the Buls. How about some pics please.

Thanks bondy.Good to see you back on here.

Hi Joe, Thanks so much for the kind words.I have enormous respect for the guys out there who are capable of building real nice looking and detailed bikes.It definitely takes a lot of time,patience and more talent than I have. That being said,I really do enjoy being out in the shop fiddling with them and doing what I can.It is a great escape,I agree,the old 199A has a huge grin factor.It is not only a great trials bike but also a fantastic play bike. I repacked my club foot last year,but kept it stock.I should probably do the mid box,but it does run really well and IMO sounds better than any other twin shock. Regards, Scott

Very nice spen.I,m curious,can you notice a big difference in handling between the two and if so which one do you prefer?

I hope you can save the GPII,very rare bike! Alex Snoop might be able to help find an engine,but if not it would make a cool Super Pioneer with any five speed pioneer motor.