Vertigo

Hello, Not exactly a major issue, but I noticed that my recently purchased R3's headlight is not on. There is a red button behind the headlight, is this a switch for the headlight? I assume as soon as the bike starts the light should come on? Thanks, Nick.

Have to wait until October! Two models released at the Milan show 300cc Fuel Injection Petrol tank located in a different place

I have a 2017 250 fajardo replica and the kickstart stop pins had fallen out of place in my clutch side and had lodged themselves in between various places in the case, thank god no major damage was done, however with new ones installed I’m trying to put it back together with no luck, especially from the kickstart assembly, any tips or tricks or do I need to take the clutch basket out, and if so how? thanks in advance

Are the regina chains on vertigo prone to rust??

Is this kickstart shaft the same as V-0231 – KICKSTART SHAFT? I'm having trouble getting the parts to fit together properly. My bike is a 2019 Vertigo Vertical Combat 250cc, and I'm using the original Vertigo kickstart lever. However, I can't seem to get it to fit correctly onto the shaft. I was expecting there to be a groove or slot in the shaft for the cross bolt on the lever to lock into, but it doesn't seem to be there.

Good morning... I have a Vertigo 300 Vertical 2018. I saw on internet that the 2019 model have a map switch on the front mask. Is it possible to retrofit this map switch on my 2018 model? Regards

Bonjour. If this is possible, could you give me a copy of the manual for the Vertigo 250 from 2020. I have some concerns. Thank you. Great site

Hi everyone, new to the forum so hopefully I've posted this in the correct place. I'm also new to the Vertigo club and unfortunately, I've had nothing but trouble with it. Initially it had a faulty relay, which prevented the fan coming on, and the bike over heated, boiling off a lot of coolant. I changed all 3 relays just to be on the safe side, problem solved. Ironically, now the fan is on too much. Once the bike gets up to temp, the fan comes on and doesn't turn off - So much so, that I think it's causing the battery to drain. (it's brand new and already down to 2/6 bars) I can probably add 40 - 60ml of coolant after every ride. I must have d…

Hi can someone advise me on how to get the dog bone on the vertigo back between the two arms it has the part number 4

Anybody know anything about this? Need to put lights on my bike.

Ive a 2016 300 combat still with a battery. Has anyone on here done the batterless mod? Wonder if its worth it, what difference it made and how hard is it to fit?

Anybody know if they intend to produce a 125 if so when .... If not why not .....

Hello all, I've just bought a 2024 nitro 300. What spark plug should I run as I was told in my 2018 vertigo to run the hotter BPMR4A rather than the BPMR6A. Do you still need to do this on the newer bikes? Many thanks

Anyone have any maps they would care to screenshot and share for map 1 & 2. Pic for att.

Hello all I'm trying to fit a lanyard to my 2017 ice hell. Bought a genuine lanyard off Vertigo but can't see where it plugs in to. I thought you would remove the original kill button and plug it straight into the loom but the plugs are different ie both females. I don't know if I've been sent the wrong lanyard. Many thanks

Yesterday on my vertical 2018 i see a red button behind the front LED mask. I think was for turn on the light.... I try to press it but nothing happen. Anybody knows for what it use for? Regards Stefano

someone can tell me what comes standard with the trial (keys, road kit, etc ...). I ask for my Fajardo but also other later or previous ones. thank you

So I'm starting to notice that when the bike is warm, on starting it it wants to, and sometimes does, stall immediately after starting if you give it a bit of throttle. It acts like a lean bog from a carb bike. It seems to be less an issue if it gets a really good kick to restart it, and/or you immediately give it a blip as it's firing. Anyone else know what I'm talking about here, or am I special?

It as a 10T on the front, 42T on the rear, what do you guys use tooth wise? it was my first ride today and it was a little high geared! your input would be most welcome. Thanks in advance

hi. I haven't found the Shoba triangle yet. It's been welded and used temporarily. I feel uneasy. I asked the Japanese dealer to get the parts, but he doesn't care. So I need a site where I can get parts. I live in South Korea. Please let me know.