jsp

Ive rung Carole Nash today who i cover my bikes with (an off road policy) but due to the price of the ossa they wont insure it. has any body managed to get theres done and through who jsp

i made a small bracket as i couldnt get it to work with out one jsp

the 2012 bikes seem ok to start, from cold you give it 3 or 4 lazy kicks to prime it and them one like you mean it and its off, when hot just the one like you mean it and its fine.very nice bike to look at and even better to ride cant wait to get on it again jsp

thanks for the help jsp

i am thinking about selling my bike and i want to remove the heavier duty rear spring i ve been using does any one know the measurement i compress the old spring to ? its 2010 beta evo 300 4t jsp

2012 ossas

have any of the 2012 bikes apeared in any other countrys yet and if so what are they like, and are they worth the money ? jsp

his left ankle is very badly swollen and brusied

what sort of money are the 2012 going to be jsp

had another bad day with the evo after cleaning the carb, coughing spluttering and back fireing didnt manage to finish the trial, got a new plug and cgi on the way to try to get it sorted any other ideas ? jsp

had another bad day with mine on saturday, couldnt rev it clean when you went to give it a handfull it started to cough and splutter but not all the time. stripped the carb and cleaned it all out, going to ride in the same venue on wednesday night in a trial so we will see. has any one had there cdi changed on warrenty yet and can lampkins test it jsp

whats the best thing to spray in the cdi connector block wd40 or an electrical silicone spray jsp

Silckgolf, what did you do to sort out your dodgy connections, i ve just had a look at mine and i have one thats blue, and last week it started coughing and spluttering when i went to give it a handfull but not all the time. i have all the usual products wd40, silicone spray jsp

Steve saunders is you man, tell him your riding weight inc riding kit and he will send you a spring and tell you how to set it up for your weight jsp

lampkins advised me to turn the mixture screw (on the bottom of the carb) out 3 1/2 turns but leave the jetting alone, and so far so good, i prefer a higher tick over which aids starting and removes any fluffyness at the bottom end. as for the suspension i got a heavier rear spring from steve saunders and he advised me on the correct set up for my body weight. jobs a good en !!! jsp

i love my 2010 300cc beta evo 4 banger, miles easier to ride than the 4rts i have had and i even tried a gas gas raga and i found i couldnt ride it, i then went to a 300cc rev 4 and that was good but the evo blows that out of the water. there smooth, powerfull and have the feeling of being light jsp

i dont want to sound disrespectful, but i wonder if the spen valley trial will still go ahead this saturday jsp

i havent got the wheel but, the did wheels are cheaper than the beta wheel, that is until you have to start buying or having extra parts made for it to fit jsp

Does any one know if a DID rear wheel will fit a beta evo 4t or if not how easy is it to modfiy jsp

i hvae done it on my 4rts and now on my evo, i hold the soldering iron on the metal untill it melts in to the plastic. i have also repaired mudguards like this by melting small metal mesh over a crack. i borrow my father in laws soldering iron which looks a bit like a drill ie not thin and pointy so weather or not is got more power not sure jsp

i just bought the nipples from a local bolt shop m6 and then drill a 5mm hole (i think) and tap it out jsp

i would strip it down and fit a grease nipple whilst you have it in bits then after few power washes a quick squirt of grease and it forces the water back out of you headstock jsp

i melt them into the plastic with a soldering iron jsp

the ball bearing is held in by a spring and a grub screw jsp

as far as i am aware you can still get all the spares, my mate just bought one and now keeps taking it from bike to bike. cant remember where i ended up with the needle on the rev 4 but the info is on here somewhere as well. i ve let the evo alone and touch wood it never misses a beat jsp