Jump to content

betarick

Members
  • Posts

    373
  • Joined

  • Last visited

Everything posted by betarick
 
 
  1. betarick

    2011 BETA EVO

    Hi all how many folk have ordered a new 2011 evo and are waitng for them? I ordered mine 2 weeks ago and are still waiting. I read a post about beta where having trouble with fork suppliers is there any truth in this!
  2. What about conrod & bearing? If was doing job i would split crank! And are gearbox bearings ok?
  3. Cant believe ishy you didnt know where the scott trial started and got its name! Hang your head in shame call yourself a yorkshire man! lol
  4. betarick

    250 OR 290 EVO

    Right i have been given the go ahead for a new bike from boss i mean wife! I want a new 2011 evo but which one? Is the 290 a handfull or should i stick with a 250. Are they hard work to control and tire you out riding them.Or are they more tame had a 270 rev 3 a few years ago and found it hard work!
  5. Hi 150psi sounds good to me on a 2stroke engine i normaly only see about 180psi on 4stroke car engines when checking compression at work on cars! Tested a diesel today and got 400psi.
  6. betarick

    TY80 Oil Pump

    yep thats it remove whole clutch cover!
  7. betarick

    TY80 Oil Pump

    remove clutch cover and remove gear from cover! you will need to make a blanking plate and gasket to blank off hole where gear was!
  8. HI get on fleebay there are full carb repair kits on there!
  9. new bike soon but which one?

  10. Hi there had same problem a few years back with my 97 techno when i pulled linkage off all bearings fell in bits loads of rusty bearing rollers fell out! I think in the end i replaced all of the bearings including swingarm bearings cost about 100 quid and took a few hours to do!Make sure you pack all new bearings with a good waterproof grease!
  11. Help please best paint to use when painting montesa engine casings black. I was considering using pj1 satin black or as anyone got any better ideas?
  12. betarick

    TY80 PROJECT

    Foot rest came from jk hirst in bradford. Thet have a website.
  13. betarick

    Won't kick over

    how do you mean it wont crank? is kickstart solid and wont move down or just slips straight down. If its solid then something as locked up!
  14. Bought a fleebay special and when i tried to turn gearbox it just locked up! When i stripped motor which by the amount of blue sealer every where looked like some numpty had been there before me.i found the gear in this state!
  15. betarick

    TY80 PROJECT

    At last after a lot of money & time spent my ty80 project is finished at last.just thought i would post some pics for all of you! cant wait to see my son ride it.
  16. Hi everyone does anyone know if kickstart gears are the same on other models ie 247.or can anyone help me locate them cheers for any help!
  17. yep new rod kit and main bearings needed there! split casings and crank will need spliting as well!
  18. betarick

    Yamaha Ty80

    Stick with it go over carb again making sure you aint missed owt! failing that you can get a new carb as these little ty80 carbs can wear slide then their a pig to get to idle right. i have just restored one it cost a small fortune new carb slide jets foat valve still was a tw.t to get to run right in the end bought new carb.runs sweet now!
  19. betarick

    Flywheel Play...

    Do bigend split crank while your there! once did mains on a techno then a few rides later bigend let go! cost me another set of bearings and gaskets! all betas have a clutch rattley noise!
  20. I had the same problem. took it off and warmed up and bent it back out of way! but then bent it again. Then the chain wearded it so thin it snapped at the start of a trial. i hadnt even got to 1st section typical luck i have!
  21. betarick

    Smokey Techno

    Probaly crank seals/ bearings. stay away unless you want to spend a lot of money on a engine rebuild! i bought a 97 techno that smoked like that!
  22. Im keeping old stator and like you say jsp im thinking of getting it rewound as a spare or sell on!
  23. just fit new stator and bike fired up 1st kick so sorted just 136 quid lighter! Tested new stator with metre and got 320 ohms across red and black wires and o.1 ohms on yellow and brown to earth on stator body.
  24. thats what i was thinking a coil of wiring between red & black wires thats all it is for ignition. looked at stator and brown wire is soldered to body of stator so is earth! and yellow wire goes through over 3 coils to earth. tryed red & black wires on continutiy bleeper on multimetre & and got nothing! so new stator it is.
 
×
  • Create New...