Everything posted by copemech
-
Scorpa TYS125F aftermarket header pipe?
find someone to glass bead blast your stock pipe then go over it with scotchbrite. those expansion chambers may be cat converters!
-
Sherco rear shock
might call splatshop and see if it needs modded. what shock is it?
-
Beta clutch drag
so what good is that on a self adjusting hydraulic clutch
-
SHERCO 2004 FUEL TANK
Never heard of such going soft on them, although they may be thin and quite flexable, they were that way from new. Worst I have heard of from the ethanol is it may make the tanks expand and grow, making fitment difficult. In that case, remove to air out for a while. What is the problem with it anyway?
-
S3 cylinder head
It looks blingy and makes your wallet lighter!?
-
Sherco ST 125cc to 250cc
engine cases are different as well as crankshaft!
-
Monday music on Weds!
This is just HOT!
- Sherco Triple Clamp
-
Sherco 250
The later years are different. Same as the 2.9 though.
-
Front folks
if the yolk is off, I would find a different rooster!
-
Fan trouble
Sounds as though the thermo switch has failed and is always on(connected). Get a new one.
-
electric cable condensator
no idea what you are referring to, call splatshop!
-
Wood in the crank?
Many used cork in the day and it is likely factory. New ones would be modern plastic. Besides, my old crank still gets wood, and I am much older.
-
2001 250 smoother running
an option, indeed!
-
Honda tlr 200 kill lanyard/wiring loom help.
Ja=SUS MAN! Leave that pristine example alone and go butcher up something else ffs!
-
2001 250 smoother running
the bikie will never run like the little gas gas because the cylinder porting is more aggressive. You may retard the ignition timing by 2-3 mm. the dellorto fuel screw is not sensitive. run your 35 pilot and 118-122 main, turn the mix 3 turns out and try it. they are reliable carbs, just not precise carbs! if really cold they can be a pig to start. lay the bike over on the left handlebar for a few seconds to allow it to flood the carb a bit.
-
Wow! 9.3K for a 74TY250
there is one born every day!
-
2012 evo lower shock bearing size ?
can you not call splatshop for this? support your supporters!
-
no start rev3
Contact Steve at Motoplat UK to fix them, but you will have no way of doing dynamic testing short of replacemrnt as the triggers seem to be the culprit..
- no start rev3
-
no start rev3
They are famous for stator issues ??
-
Rev 3 plastics
never would have figured that, surely someone in itily has them!
-
Not new to Trials
active group there, not sure about the vintage members
-
New value for money GasGas
they have always ben disposable!
-
Need help! 2008 montesa 4rt will not start
replace spark plug