| |
-
Bit of camera mind w@nk !
-
Hello Pat Scott, I can supply cheap pens + calculators, silver foil and clockwork mice to assist you in your missionary work.
Call for a quote.
-
I almost said that, then I thought it could have been an 80cc.
All revs and clutch.
-
Have you asked
http://www.dellorto.co.uk/ ?
-
-
Don't quote me but there are 2 types of number plates, MOT ones, and the other ones !
-
A plumbers pipe cutter is the neatest way if you don't have a guide. 10mm off each side makes a noticeable difference.
-
http://www.ebay.co.uk/itm/STICK-ON-SELF-ADHESIVE-LETTERS-AND-NUMBERS-reg-plate-/200877525106?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2ec53bc872
-
Only the "better" riders seemed to stand up !
See the local policeman was there, purely to control the crowds, not sciving..
-
New Year's resolution, no more double enders.
-
It's a shame that clashes within a 70 mile radius can't be avoided.
-
My latest acquisition had slack cylinder head bolts, oh, and a missing stud, and no gear box oil.
Other than that it was fine.
-
Brema made one piece cotton suits in the 80s, the red ones went pink, and the blue ones turned to rags at Linthgow, if your initials were GM.
-
Not on a tube type rim, IRC tube type for twin shocks.
-
Sorry, but I would be very surprised if it worked.
-
Ever noticed that the nuts and bolts that arn`t slack, are so tight you can`t shift the bu**ers without a nose bleed.
-
"In box" private message box.
Squish - distance between piston and cylinder head at tdc. I needed that as I went from 240 to 250cc.
If you do have to adjust the squish it can be done on a lathe as it is a centre plug hole.
Ross
-
From Peter Knight for 240cc, might be of some relevance ? Your In Box full ?
Clearance min 0.07mm max 0.09mm (skirt)
Squish 1.25mm - 1.50mm
-
Generally no problems with IRC' s and Akront rims.
Also been using Talon rim locks with no problems.
-
Did you have to wear a peaked cap when you took the owner out ??
-
Had a quick shot in one, rally suspension etc, now that really is a classic.
-
Not everyone sneaks extra nuts and bolts in for fun !
-
Raise you a
Holby Hilman Hunter
-
Was it a magnesium casing ? Your lucky to have someone capable of doing it successfully.
-
http://www.toolprice.com/category/screwextractors/
These things are great when they work, but beware if they snap!!!!
|
|
