| |
-
There is a gentleman rides Cumberland county trials on an electric bike. I believe he is in his eighties.
Maybe contact the club for some info.
@t-shock 250
-
Something to consider when moving them back is the side stand, if you want to retain it this might be a limiting factor.
-
If your over 6' it will definitely make it nicer to ride.
-
Holding on to tight, will tire your arms quickly, and you need to be "loose" to move / compensate. Also, practising is probably more physical than riding a trial , as usually it's more intense with fewer breaks to recover.
-
racing your mate/s to the next section, helping fix mechanical problems, sharing sweets/ tools/plugs/ pints afterwards. All the above, and this is why multi day events are even better as you have so much more time to share stories / experiences - good and bad. . ( you meet the strangest of people queuing for pipeline !!!)
-
@breagh hearing the spec today, suspension and brakes that work ?
-
If winning was all, most of us wouldn't compete ?
-
I've ridden some of Jocks earlier twins, pleasantly surprised how good they are. Enjoy, and have a good new year ?
-
Your wrong , unfortunately.
-
Is there a breather on the crankcase ? Gearbox breather ?
-
-
-
https://todotrial.com/nuevo-campeonato-del-mundo-de-trial-de-veteranos/?fbclid=IwAR1k6ve8WwhLcrD1MgZmdxu42HE5BKEh4Y3phwJqRGcbYfVtETQZTsjgQT4
If only it was true ....
-
As above, but have the fork welded first to fill in the dent.
-
I prefer to watch trick bikes being ridden, than original bikes being polished ?
-
-
Merry Christmas to you too, I'd appreciate it you would not use a conversation on a "forum" as an example of the following - "You'll have to get used to that on here . It's no wonder why very few even bother to look on TC these days ."
-
If the timing was very advanced the engine / exhaust would run at very high temperature, it could have been crap getting burnt out, hopefully !
-
Just answer the question. Why the random personal attack ?
-
The "cam" is the centre of th flywheel, so it does need to be fully home, but not necessarily tightened. (always wondered what nobody makes a dummy centre)
-
Are you checking with the flywheel fitted ?
-
Interesting, a random personal attack criticising spirited debate between friends !!!
Of the dozens of civilised discussions available, you and "friend" chose to comment on just one ! What are your true motives / prejudices ?
-
Imagine a figure 8, just an extra tube welded on .
-
I've seen an additional "end" welded on, not the prettiest solution but if you can weld takes 10 mins.
-
Is the writing on the sticker the correct way up ?
|
|
