Montesa

Does anyone have any experience of using Silkolene Pro Boost? Would it be OK to use in a 4RT? Is there any downside, eg engine wear etc? Cheers

Hello im in the process of sorting out a 349 cota gearbox (would guess mid seventies bike). The owner took it apart but got the shims wrong and as such only had 1st and 3rd gears. I have the montesa manual but its vague about the shims, especially the sizes. does anyone know the specs of the shims (width/diameter etc) or can work them out from the montesa part numbers? Thanks for your help! Can take pics if you know them by looking no measuring.

Does any one know how many turns the mixture screw has to be out?? Cheers

My mates Cota 315 98 model keeps stalling when we are out. The bike starts ok and runs for say 15 minutes. Then for some reason stalls and will not start again. It will start if we leave it for say 1 hour but as you can imagine this is very annoying! So he has had the stator cap off and found that the gasket had perished and a bit of crap was around the stator. He has now cleaned this up and resealed. We are going to give it another go at the weekend but I recon a new stator may be in order. What does everyone think? Has anyone had a similar problem? We will obviously give it a go first but I know electric probs can be a pig!

Hurrah, Mrs Dabber has gone and ordered a Repsol for my birthday. (should have arrived 3 weeks ago, but still hasnt). In terms of setup I plan to detune it and lower the gearing to make ait as soft as possible. Today's question is how adjustable is the suspension? I weigh abour 16st and want to wind it up so that it's bashplate doesnt drag all the time.

All the gasser boys use this......does it work ok in the 4rt ?

So as none of the 4RT riders out there miss this, there is a 4RT personalised reg for sale on eblag. Type in Montesa 4RT you will see it.

Does anybody make a enduro kit for the 4rt. To get between riding areas we sometimes ride on National Forest Roads.\in the USA. The Rangers will hassle or ticket you if you do not have headlights and taillights. Has any body done a enduro conversion. Thanks

was out on my bike over the weekend up charlton and war riding down near the via-duct, i was crossing the river when suddenly the front wheels slipped and the bike went under. i got the bike ticking over but as soon as u reved it a little it wud just stall eventually i got the revs up a lil and got it up in the carpark. i then finally got the bike reving as normal. i got the bike home and cleaned the carb out and flushed the tank out and i put the carb back together and now when i start the bike and leave it ticking over petrol starts pourin out off the over flow, now my bike (montesa cota 311) has 2 float and 1 is is 1/4 and the other is 5/8 and ive tried them both ways …

Does anyone have a copy of the parts manual and service manual in pdf format. It used to be on the us montesa site. I had it but my pc crashed the other day and I have lost all my information. cheers richard

I have a cracked Airbox right underneath where the fender attaches at the rear on the left side at the tab/ear like portion. Its actually a large gap, is there anyway I could plastic weld this back together? New air box cost 200.00+

Hi all, Anyone know what the options are for 4rt longride seats ? not bothered about additional tank capacity, just want one to ride three miles to and from work in the summer

I am getting the Montesa ready for an MOT, to which I have taken the spacer from the front wheel and put on the speedo drive unit. However the right angled actuating arm seem to sit in a channel on the wheel with nothing to drive it round. Am I missing a part? Any ideas as this seems very strange, any pictures appreciated. andrew.dodds@btinternet.com

I pick up my new 4rt on Friday. Does anyone have and advise on running the bike in ? Checks to do, first oil change, how long to take it easy etc. Cheers ...

hi all i need some help with year identification on my 315r, i bought it as a 2002 lampkin rep model but ive seen 2001 models that look the same .it as the blue- purple effect forks .need to no because im selling it and going back to twin shock.any info would be gratefull( cheers)

Ive only just got the bike. When its cold and i start for first time the engine sounds rattly... it sounds a lot better after ive ridden it once its warmed up. Do they all make this noise of do i have a potential problem? 2005 4RT Jza

Is there an Iridium plug available for the 4RT? I seem to remember someone saying that a CR6EIA-9 crosses to the stock CR6EH-9 but it has full threads. What's with the partial threads on the stock plug?

Urban trials bike. What about adapting a current bike or similar for 'urban' use. Where noise is almost always the worst problem. The idea is the bike is a proper trials model, but it has to have a lot more sound proofing. Bigger silencers, thicker exhausts, cases etc. Ok its heavier but would it be possible to reduce the sound levels considerably in some way. Still suitable to be road registered. It would still be comparatively light but would be expected to run in a different 'class' perhaps. Might be handy in Japan and the UK at least. Another bike varient for the manufacturers to make as well based on the same technology. Ideal for my garden!

I am thinking of doing a few upgrades to my 315 montesa. I've heard of a different barrel and head being put on. Boysen rad valve being put in, flat side carb, has anybody done any such upgrades to their monts and was it worth it / how much did it cost. I've put the jitsie shock plates on, different clutch plates. I don't want to throw money at it as its always only going to be an old 315, but I don't ride often now and have got money left over from selling my 4RT. Any suggestions?

Anyone know where to get a chain guide for a front sprocket/engine case quickly? tried *&* but sold out