Vertigo

Are the countershaft and rear sprockets specific to Vertigo, or are there generic options available for one or both?

hi.... I'm jeong won living in South Korea. Vertigo 12v start battery connection is inconvenient So I made a 12v portable starter battery with 18650 batteries. It is 11.1v by connecting three 3.7v batteries, but 12v comes out because it is 4 volts when fully charged. In the photo, the battery hold is on the side but is actually under the air filter. Make a switch and start the engine When started, disconnect the switch. If the switch is connected and kickstarter 3 starts.

Hi can someone advise me on how to get the dog bone on the vertigo back between the two arms it has the part number 4

Evening, I’m planning on greasing and checking my rear suspension this weekend and it’s a while since I’ve done one, has one got any advice as to what order I strip it all down in ????

hi. I haven't found the Shoba triangle yet. It's been welded and used temporarily. I feel uneasy. I asked the Japanese dealer to get the parts, but he doesn't care. So I need a site where I can get parts. I live in South Korea. Please let me know.

https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fwww.trial-club.com%2Fwebzine-trial%2Factualites%2F2015%2Ftrial-club-a-essaye-la-vertigo%2F Nice report with pictures on the new bike make

Hey All, I am doing an EFI project and want to use the Vertigo throttle body and TPS. Its a good price. Before I go ahead and purchase one, I want to check fitment. Does anyone have any pictures of one? More the better. thanks!

Hi I have a vertigo nitro 250. I stepped down from a 280 trs and found the bottom end to be a bit too soft for my liking. I have been playing around with the get ecu tuning, more fueling off the bottom seem to help a bit but I'd like a bit more power. I'm wondering if advancing the ignition timing off the bottom would help? But I'm worried about messing with it too much. Other alternatives I'm assuming could be adding a high compression head? Has anyone tired this? Hoping to get some suggestions. Thanks!

Hi just fitting a low comp head insert, anyone know the head bolt torque settings please

Hiya, anyone tried the e10 unleaded in their vertigo in the Uk, good or bad opinion? does it make any difference over E5 given it’s got 2stroke mixed in? though I would ask before I tried it, been using super unleaded e5 until now, but it getting harder to find. cheers

My new 250 ice hell arrived last week and I love it. Just notice it has Michelin X11s on it, would of thought it would come with X Lites?

I see on Facebook a new bike coming does anyone know anymore?

Hi. I'm a user living in South Korea. The RPM suddenly became unstable. I changed the 9v battery to a new one, but it just says that the battery is weak and it doesn't start. If I connect the external power, the engine will start. The RFM is unstable. If you turn off the external power, the engine will turn off. It's because of the negative electrode. Is it because of this? I don't remember where the cathode paper was. I'd like to know where to connect.

Hello all, has anyone bought and experimented with the Athena Wificom for 2018/2019 Vertigo? I was thinking about buying the device, as my 2019 Vertical 300 keeps running rich even on dry map, the spark plug gets sooty and overall the bike feels like it's running too rich at high revs (four stroking). Air filter is always clean, tried different new spark plugs, fuel is 100 octane, fresh, 0,5% Motul 800 oil. Dealer says bike is ok, which is 99,5% true, but I was thinking about turning the "carburation " leaner with the Wificom device. Any experience/advice? Thanks in advance!

Hello, i´m searching for a wiring diagramm for my Vertigo R3 300ccm year 2021. Has anybody a idea where i could get this please? I hope someone can help me. thanks for information and br