bilks

http://trialstribula...roducts_id=1068 2006 Rear guard.got a few more from 2003 onwards prices starting from £64+

Put a smear of silicone grease in the recess.

No the gearbox oil shouldn't flow into the crankcase.it's the premix that feeds the main bearings and crank.Hope your bottom end is ok.

Use can use Gas Gas Pro Cap the later PRO'S have the breather in the cap.so you would have too blank one off either the one already on your tank.or the one in the cap.approx £30 new or you could try Richard on 07917 406313 01933 314145 he breaks quite a few bikes.

Simple wiring for the TL http://www.kaila.net...25/tl125wd.html Normally coil is not earthed only the black wire from the terminal.

Watch this http://www.youtube.com/watch?v=hjoj7n74G0s there is also 2 more on youtube,this is part 1

Just done a trial today,at Barnsley with the Barnsley Trials Club. i'm 64 don't i know it i ache all over.15 1/2 STONE and ride a Gas Gas 125 pro ,I returned 2 yrs ago to trials ,But i wouldn't have missed it, after 20 yr lay off cos had my bikes were stolen,and couldn't afford to replace them. i know Edonsfield well,Used to ride there with the Sheffield & Hallamshire Club.But not been there since Grant bought it.Go for it.

Why not ring Splat shop,or Email them,to confirm if they are needed,They can tell you more info.

Some specs here http://www.yamahaty....nique250en.html only service manual i could find was on E bay from New ZEALAND http://www.ebay.com/itm/YAMAHA-Workshop-Manual-TY250-Trials-1974-1975-1976-1977-1978-Service-Repair-/360804047787?pt=Motors_Manuals_Literature&hash=item540198dbab

The link not working from outside of USA. the link has been mentioned this week on this forum. not the best images.but might help.

Be nice if we all knew which make, model,cc and links to videos.

Not from UK tried the links only Facebook worked.

Hi just fill your gearbox to halfway on sight glass,as regards your oil not too sure because i used atf and changed it regular,i also removed 2 springs, out of the clutch pack to make it lighter.

Who ever you ask,everyone has different opinions,best thing to do if possible try both and different makes.

I agree there are not any separate seals for your bike,should be as in picture,built into the bearings

Change to SORN http://www.visordown...week/24155.html Save a lot of hassle for registered bikes,not on the road.

Read this from Jim Snell http://www.gasgas.co...aust-clean.html going to try it on my mid box.

Looks like it here,but don't know about 2014 models http://www.beta-uk.c...=54:2013-models

Try here http://www.haventria...th=1679_646_692 but ring or e mail to make sure in stock,because he does not tell you if they are or not,when you order online.

1297900 000 Front Wheel Bearing 20.37.9 09-11 this is from http://www.haventrialsport.co.uk/index.php?cPath=184_176

This link give you the Frame no's http://www.beta-uk.com/index.php?option=com_content&view=article&id=117:frame-numbers&catid=45:info and second one shows Models http://www.americanbeta.com/node/751

No problem,every little helps,we traveled all the way to Tayport for 1 of the TXT'S 5 1/2 Hrs journey time,thanks

The bike wasn't advertised on a auction site,first Every time its been on Facebook, it was for sale,2nd time up for swaps for a road bike only,and last time,for sale,on Facebook Also on Gumtree with E Mail address only,tried sending mail,got no reply started at £800 then dropped to £500 eventually sold for £400 well that's the last seller told the police,and he didn't know who he sold it too,or where they came from.Had Crime no from original theft.and another 1 given me.In fact the first person who was selling it even put the chassis no in his advert. I wish it would have been on a auction site.then i would have done as you suggested.

Hi i had 3 bikes stolen on June 14/15 Beta Rev 3,and 2 Gas Gas TXT 200's,The Beta Rev 3 has been spotted,at 3 different times for sale on Facebook,since Septemeber,October,and lastly last week also on Gumtree,Police was informed every time,and everytime,it's took them over 3 days to get back in touch,by the time the police got in touch,with the last seller,it had been sold on again.It was being sold from Rotherham,not 3 miles away.Chassis no for the Beta Rev 3 ZD389000020005751 Picture as was being sold on Facebook and Gumtree.

Hi if u have a good idle,try and slow it down with the slide screw,to a acceptable level without stalling then adjust your air screw to see if the engine speeds up or down,the rough starting point for the air screw is about 1 1/2 turns from fully in,make sure your engine is fully warmed up.also check your plug to check the mixture.