copemech
Members
-
Joined
-
Last visited
Everything posted by copemech
-
-
all about money, you know!
-
-
good deal, as I was going to point you toward Jim anyway, as he is the knowledge bank. parts too! you may have to make up an inlet hose.
-
if it is a standard dellorto phbl the things on either side are bowl vents only and not an overflow. no hoses are required but short ones act as mud deflectors. the float arm should be Level with the bowl surface w/ inverted. be sure the floats are not floded and float properly.
-
So true!
-
our importer carried a welder to events for the 2006 models!
-
gonna take a while to break them in, in Florida, as there is only three rocks in the entire place!
-
go here and find the service info misc. tab for info you need. http://shercousa.com/?page_id=328
-
No!
-
Double bleep is what happens when my Tourette's kicks in!
-
I recall them having kits for the enduro and motard bikes, but not sure about trials. may have to call the importers
-
I do not think so, as there are a lot of subtle changes. Go ahead and try so you can tell us!
-
Not to mention beautiful!, her and her sister as well Glad she got rid of the old blue one piece though, as it was around far too long!.
-
the original bolt is kinda special little short 5mm sucker. if it has been hit and damaged the threads, a 6 may have been rigged up. the bolts are inexpensive.
-
-
-
someone may have sprayed some oil in there as a corrosion preventer as they are horrible about letting water in at the cover. if the bikie runs well, start with a good cleanup with some light solvent and inspect the flywheel for up-down movement from loose bearing. if all looks good ride it.
-
-
-
Buy a plastic tank!
-
RYPUSA.com is the US importer. Splatshop is in the UK.
-
the F and the G, eight digits back, A is 2000
-
try here https://www.americanbeta.com/
-
gotta use the galfer pads, run them in for a bit and heat cycle normally, then make about 3-4 high speed stops heating the front and pull out your water bottle to douse them good, should steam off a lot! do that a couple times then let cool and resume normal operation.
