| |
-
P.M. sent
Fingers crossed
-
Let me know what model your TLM is and your direct e mail address and I can send you one by e mail
-
Hopefully you can zoom in.
-
-
Sorry Mr T
Can't help with any DT manuals.
Good luck
-
Food for thought ?
http://www.gasgasrider.org/forum/showthread.php?t=8199
-
https://www.tytrials.co.uk/trailandtrialsuk/prod_53410-16-Pair-Fork-Top-Allen-Bolts-TY250-twinshock.html
-
replace the points and condenser
-
As above, and a rattle gun will help.
-
Sorry Feet Up, can't help you with any info.
Maybe Craig could help ?
http://www.yamaha-majesty.com/
-
Hi BP
Nice to see my old Majesty again. Unfortunately it wasn't a works bike, number 172 of 175 built , if I remember correctly.
I completely rebuilt the bike and the exhaust system was designed and made by my old friend Keith Horsman,
This is what it looked like before I started the rebuild
-
Apologies, I should have made clear that the hubs I used were single cam, standard actuation
-
Thanks.
I didn't have any problems with the hubs as they were from the same era.
-
I fitted Yamaha DT/MX hubs to my Majesty, initially because they were the closest visually to Mick's works hubs at the time, but I was pleasantly surprised how much better the brakes were compared to the original hubs.
-
There are 8 pages of interesting information on the Crusader 250 models, including the works version, in Don Morley's book Classic British Trials Bikes.
-
OEM Yamaha part number is 46Y-11181-00-00
-
Just the same as the TY250 copper gasket, but slightly bigger bore.
Not sure if they are still available, but you should be able to open out a 250 gasket with a dremel and a steady hand
http://www.yamaha-majesty.com/?product=cylinder-head-gasket
-
https://parkwood4x4.com/trials
-
I fitted a 150cc conversion to a friends Randonne, and was pleasantly surprised at the increase in performance.
-
That looks really nice.......
-
I couldn't get a 240 piston for mine John, so I fitted a 260 TLM piston with a bit of machining, i'll send you a photo with the manual for the 240.
-
-
Hi Daniel,
It's always difficult if the original wiring has been modified, but I would connect the black to the coil terminal and making sure that the coils bracket is earthed, check for a spark at the plug.
-
Hi Daniel,
Hope this helps.
-
Me enjoying the Scarborough mud in my camo
|
|
