| |
-
http://www.trialscentral.com/forums/topic/31595-disc-valve-position/
-
Hi BJ
I have no doubt about the SSSI's, I just have difficulty getting my head round why only motorcycle's damage them while thousands of feet, mountain bike tyres, forrestry equipment etc dosent !
Ross
-
Are there no legal place to practice ? Considering the history of trials in the area its not an unknown "minority" sport.
Walking, cycling, skiing etc are very well catered for, why not trials ???
-
Always wondered what those things in the garden were for !
-
http://www.trialscentral.com/event_calendar/event.php?calendar=1&category=0&event=4147&date=2012-04-01
-
Agree with three posts above, also good to see so many up from the North East.
Ross
-
http://www.trialsbits.co.uk/index.php?cPath=85&osCsid=0tkktr485l1p4tp74c2otfsb71
-
I think all trials should be marked using a card as opposed to punch cards, riders should not be allowed to question their marks, just thank observer and move on. ie remove the potential to argue might encourage more observers.
-
Suddenly thought I might start an international incident, again.
-
She now on deposit in your *ank bank ?
-
Thanks Woody, fair point regarding measurements !
Just checked their site, the gaitors I want are £2 12/- 6d 3 farthing, plus postage.
Ross
-
Any one know a supplier for gaitors for standard B40 WD forks ?
Top opening 57mm bottom 50mm approx by 250mm long approx.
Also are there any trials springs available, probably not as fewer and fewer are using standard forks.
Thanks
Ross
-
I would like to see him try the rotation trick with each wheel in a 2' rut ?
-
Plates stuck together ? Just a thought !
-
Photo forwarded from above.
-
Good find, you would think looking at the video that it was a nice dry SSDT !
-
http://www.trialscentral.com/forums/topic/33995-leaking-irc-tyres/
-
Yes, Wayne the owner is frequently on here, I have purchased carb adjuster screws which were really good quality.
Many people on here have bought from Billett Parts, worth looking at his other stuff.
Ross
-
-
http://www.idmcc.co.uk/index.html
-
George Spence in Cupar used to be the man for wheel building, he can give any length of spoke and bend you need.
-
-
Agree totally with OTF, try one of these with a decent air filter oil (I use Partner Chain Saw oil) should make a differance.
http://www.trialsbits.co.uk/product_info.php?cPath=21_231&products_id=933
-
Brian
Have a look at mine tomorrow, not pretty but effective.
Ross
-
If you reverse a hooked sprocket the teeth get ripped off almost instantly, if there is very slight wear and it is reversed is it OK ?
( It's not quite as worn as in following picture. )
http://www.dansmc.com/rearchain.HTM
|
|
