b40rt

Asking for a friend. Anyone know where to get a con rod & big end for a MZ 150. Apparently they can be machined to fit the Bantam. Thanks in advance. Ross

I got some for a BSA from a cycle shop a while ago, think they were bottom bracket bearings.

Surly you'd both be the last to find out ?

Hi Javier Looks like Cub to me, 40 spokes ? Edit - spacer more to do with tyre clearance issues ?

4/5 for rear is good, except if it's an IRC, in which case 6psi as they have a very soft carcass. IME

Where's the nearest pub ?

Thanks for posting.

Curtisy 0f 2/4

Surly it would have to be an eye injury ?

Try insulting Subaru's

Do you actually believe this propaganda, or are you just being antagonistic ?

http://www.ssdt.org/downloads/2012/2012%20Pre%2065%20Saturday%20Results.pdf

I would have to draw the line at gardening gloves, have you no self respect ?

Hi Bony_toe, there's the occasional trial up at the Knock, check the Lanarkshire MCC web site for details http://www.lmcc.co.uk/trials.html Used to ride on that bing occasionally, thought it was frowned upon these days ?

You can do that on line, takes seconds.

look at his other adds, might explain the 501cc etc.

Lights, if fitted, must work. Horn must be a continuous tone.

http://www.trialscentral.com/forums/forum/14-pre-65-bikes/

phone this man, used his on a B40 for years. http://www.terryweedy.com/index.html

But dont take your mobile phone, gets you into all sorts of trouble !

So clear cut a 5 I'm surprised you use this as an example !

Engelbert Humperdinck - Lesbian Seagull

Mark the position of the nut when tight and use this as reference. Crude but works.

Did you read this, might help. http://www.trialscentral.com/forums/topic/39721-sucky-brakes-any-way-to-make-them-better/ Rotax clutches always drag, in my experience.

How about this one :-