Everything posted by b40rt
-
Montesa Cota 247
J B Weld is pretty good for small repairs.
-
Stolen Betas
Doesn't sound like you have much faith in the police ? What database will the VIN's be checked against ?
- problem with crankshaft
-
problem with crankshaft
Metal inserting plastic shield ?
-
5 gears vs 6 gears. whats your opinion?
Depends on the terrain, I use 5th & 6th off road regularly.
-
not starting
Air leak ? Tighten jubilee clip on engine side of carb.
-
5 gears vs 6 gears. whats your opinion?
During a postage stamp trial, maybe. Real trial, 6 sensibly spaced gears are always better than 5.
-
Hello World, Mark here trying to read a spark plug.
If its still an NGK, plugs that run hotter have a Lower number.
-
Main bearings reassembly
http://www.belray.com/bearing-failure-due-over-lubrication
-
Original fork springs vs. Magicals - a brief review
Think your analysis is about 99% out !! (@pmk, incorrect)
- Gaerne Boots
-
Cota 247 Motoplat Ignition Set-Up... Clueless!
If you have fuel in the crankcase, and it sounds a possibility, try NO fuel, NO tickling.
-
Where are all the entries????
Or stop allowed !
-
Affordable alloy Petrol Tank
Don't think I've seen affordable and alloy tank in the same sentence before .....
-
Cota 247 Motoplat Ignition Set-Up... Clueless!
Have you tried switching petrol off, kick over with plug out, heat plug and replace. Try starting without putting petrol on.
-
SWM clutch springs?
Routing of clutch cable is important, get a new one unless its very good. Read about clutch levers, they make a huge difference. I have been using fully synthetic 5:30 for about 2 years, works for me. Clutch will slip in high gears if you drop it, a compromise I'm willing to accept, more down to clutch springs rather than oil,l as it will also do this with other oils. Might be worth trying the "Beta Clutch Fix" I have gently filed clutch baskets in the past, it will make an improvement, but try and source a good one.
-
SWM clutch springs?
- SWM clutch springs?
Seriously, all the info you need is in the swm forum. Things to check - clutch springs, probably to hard. Clutch cable condition and routing. Clutch lever type. Clutch basket probably notched. What oil in gearbox ?- Tubeless Rear Not Holding Pressure After Rebuild
You'd think someone would invent a tube, save all this fannying around ..- SWM clutch springs?
- Tubeless Rear Not Holding Pressure After Rebuild
https://www.screwfix.com/p/evo-stik-plumber-s-mait-750g/14477?cm_sp=managedredirect-_-plumbing-_-plumbersputty- Electronic Ignition, Swm Special
@turbohead how did it work out ?- Rear Shocks, Which Ones?
Shocks that are set up for your bike, weight and riding style will let you get the best from you and your bike. Quality re-buildable shocks will last longer, and are generally tuneable / serviceable. Often this makes them cheaper in the long run. Its probably best to speak to an experienced rider with a bike the same as yours, rather than take advice from enthusiastic newbies.- Where are all the entries????
You need to stick to something simple, like chess, bridge or golf. You can pick up the rules in a matter of minutes ......- Busto and Fajardo to Gas Gas
Another day. Bike compiled, why is that "farcical" ? How much of an advantage can a kilo or 2 make ? Not quite in the same league as substance abuse that's all too common in many sports ! - SWM clutch springs?