Vertigo
216 topics in this forum
-
Hi Guys, Just wondering what the consensus is on long term ownership of a Vertigo now that quite a few have been running them for a while? Is it possible that they will run reliably over a sustained period without the need for complex equipment / knowledge to ensure they do? I'm thinking about the average joe with no specific expertise in EFI that would use the bike regularly. I've read on the Ossa forum of people feeling the need to recalibrate components like the TPS etc every so many hours on a laptop with a diagnostic cable and also that Montesa owners have access to similar hardware but there is nothing out there to the best of my knowledge for Verti…
-
-
- 14 replies
- 6.4k views
-
-
Hi all I'm after a new chain for my 250 ice hell the only place I seem to find one is Vertigo uk as mine is a 103 link. Does anyone know where else I could get one or any other Ideas Thanks
-
-
- 4 replies
- 2.8k views
-
-
hello, I have a vertigo replica Fajardo 300. I had problems with the crankshaft bearings, and since I changed them, my motorcycle when it wants it does not have a spark in the spark plug when it is hot. In motion it never stops, but when trying to start when it seems to it, it does not spark. any ideas to look at?
-
- 6 replies
- 3.4k views
-
-
I know how to adjust carb, but there is no idle screw on Vertigo 🙄 Idle speed is to low and it is stall regularly
-
-
- 6 replies
- 6.3k views
-
-
Hi I’ve just bought a 2016 combat 300 that won’t currently start (bought with an intermittent starting issue). What does the powerbox part number V-0533 do within the ignition system? thanks
-
- 0 replies
- 1k views
- 1 follower
-
-
Hi. Rider lives in South Korea. The light linkage support was broken during zap zap practice. There is no place to buy in South Korea. So I would appreciate it if you could let me know the global delivery site where you can purchase this component. I want to thank you in advance. It's translated into a language translator, so please understand if it's weird.
-
- 4 replies
- 2.3k views
-
-
Hello everyone, I submit my problem to you. My Vertigo Busto 2021 250cc motorcycle starts poorly when cold or hot. He needs at least two kicks each time. In the long run it's painful. have you ever had this type of problem? thanks in advance
-
-
- 7 replies
- 3.1k views
-
-
Will Vertigo introduce an electric start model in 2022?
-
- 1 reply
- 2.1k views
-
-
2016 300, with the updated 2018? "battery less" ignition, starts and runs 1st kick when adding a 12 volt source, no spark, no fuel pump without 12 volts added, when running at 1800-2000 rpm its charging at 14.4 volts, just seems to not be creating enough electricity for starting requirements.. Help!
-
- 1 reply
- 1.6k views
-
-
Hi guys I’ve recently had a 2017 ice hell, I was just wondering what the sag is like on your bike guys? bike on paddock stand rear wheel off the deck I can lift the rear wheel a few inches but the motion feels very loose like a bolt has snapped or the sleeves in the linkage by rear shock have worn, anyone else noticed this?
-
- 0 replies
- 1.5k views
-
-
I have a 2019 Vertigo Vertical 300 and I would like to try the 2020 Vertical 300 map. It would be great to compile a database of maps that the Vertigo owners can share and try. This forum allows the upload of the map file format. I found a good instruction video that is posted below. The WiGet app for the GET Ecu makes it very easy to share maps. I currently have these maps to share: 2020 R2 300 2019 Vertical 300 I will update the list and post the maps here as I get more Thanks, DT
-
-
- 24 replies
- 10.3k views
-
-
Anybody know if they intend to produce a 125 if so when .... If not why not .....
-
- 2 replies
- 2.2k views
-
-
Hello all, I've just bought a 2024 nitro 300. What spark plug should I run as I was told in my 2018 vertigo to run the hotter BPMR4A rather than the BPMR6A. Do you still need to do this on the newer bikes? Many thanks
-
- 2 replies
- 3.6k views
-
-
My 2016 Camo had been working great, then started having shifting troubles. The lever sticks in up position after shifting up, can’t make another shift until push down slightly and then back up, almost like using a ratchet driver. In neutral the lever has a lot of free play in both directions. Any ideas what could be wrong?
-
-
- 6 replies
- 4.4k views
-
-
Anyone have any maps they would care to screenshot and share for map 1 & 2. Pic for att.
-
- 2 replies
- 3.1k views
-
-
I did some searching, but didn’t see any answer. Is there any sort of Service Manual available for the Vertigo? software for the FI with diagnostics etc?
-
-
- 146 replies
- 43.5k views
- 3 followers
-
-
Hi guys, was my first outing today on the vertigo r2 250cc 2020 model. First owner...ive noticed sometimes more than other takes about 10 kicks to start when hot? Is there a knack to starting throttle positions? Any help be great, I will obviously call dealer also
-
-
- 10 replies
- 6.1k views
- 1 follower
-
-
Hi guys, has anyone removed their swing arm? Do I need an extractor to remove the anodised red semi axis?
-
- 1 reply
- 2.5k views
-
-
Hello all I'm trying to fit a lanyard to my 2017 ice hell. Bought a genuine lanyard off Vertigo but can't see where it plugs in to. I thought you would remove the original kill button and plug it straight into the loom but the plugs are different ie both females. I don't know if I've been sent the wrong lanyard. Many thanks
-
- 2 replies
- 2k views
-
-
Whats everyones thoughts on this ? I'm not over keen on the colours but if you look at what you get extra for the couple of hundred quid over a std bike its a bargin http://vertigomotors.com/en/news/?fbclid=IwAR1nm5uf6QDJ98e-trRia8GUVU-QbH4rF7wmeb1iW1x37Mm-mUKy5hk5yB8
-
-
- 17 replies
- 8.5k views
-