Vertigo

Hi all, I snapped a link on my Regina chain on my DL12. I bought a 120 link RK 529 MXU chain and figured I could cut it down. However I can't find a half link for this chain or a rivet/master link (as the Vertigo needs it a 103 link chain it appears) I'm going to return the RK chain but before I buy a new Regina 103 link chain, does anyone know where you can get a master link/rivet link for a Regina 520 chain? I figure I'll just fix this one. I've currently bodge it by pushing a rivet pin out, putting a new half link in and pushing the old pin in. But this has of course created a stiff link. All …

Could someone take a peek at how much clearance they have between the chain tensioner bolt where it screws into the swingarm and the chain itself? Mine was rubbing, and I'm assuming I bent the tensioner, but I don't see any obvious damage.

So on the GG Racing models that ship now, they come with a bearing cup in the throttle side to prevent that bar-on-handlebar drag you'd get when doing anything where you're putting a lot of pressure on the grips. It's a nice feature, but if you want to keep it, you can't run bar ends. Curious if the Vertigo has anything like this on the throttle side?

Ordered a 2017 300 Ice Hell, on the proviso that the test day at Birdlip Quarry goes well and i still want one after! This would only be my second ever brand new bike, so am quite excited! Now to see about selling the current stead!

Does anyone have a manual on the Dl replica 2021 please 🤞🏻

Fan was on constantly on last ride out.Coolant checked.Attached my GET WiFi reader and it showed nothing.Except fan control was blocked out?Temperature sensor read open circuit for resistance between ground and terminal with wire disconnected?Seemed to be cutting in and out tonight when testing?Anyone seen this before of any ideas?

Hi. I'm a user living in South Korea. The RPM suddenly became unstable. I changed the 9v battery to a new one, but it just says that the battery is weak and it doesn't start. If I connect the external power, the engine will start. The RFM is unstable. If you turn off the external power, the engine will turn off. It's because of the negative electrode. Is it because of this? I don't remember where the cathode paper was. I'd like to know where to connect.

Got the 550 gram weight kit(Vertigo kit). Shifter hits the case. Any fixes out there or am I resorting to grinding down the shifter?

Are the countershaft and rear sprockets specific to Vertigo, or are there generic options available for one or both?

Is the E start Vandal really going to happen?

I have been working on my sons 2018 R3 and having issues getting the kick starter gear reinstalled. I have no doubt the answer is right in front of me but I can’t figure it out. When I install it the Kickstarter won’t spring back. I have looked at it several times and can see how I’m installing it wrong. I have attached a few photos for someone to probably point out the obvious……maybe I’m just tired. Thank you in advance .

Hi all , I have noticed my 2017 ice hell is getting louder , as with other bikes I have owned I would normally just repack the exhaust but to me it looks sealed and have just fell over with price of new one just shy of £600 . anybody else had this problem?? Any ideas ?

Will Vertigo introduce an electric start model in 2022?

2016 300, with the updated 2018? "battery less" ignition, starts and runs 1st kick when adding a 12 volt source, no spark, no fuel pump without 12 volts added, when running at 1800-2000 rpm its charging at 14.4 volts, just seems to not be creating enough electricity for starting requirements.. Help!

Hi guys, has anyone removed their swing arm? Do I need an extractor to remove the anodised red semi axis?

Anyone know off any company's making aftermarket guards for the frame and side casings, seen carbon one on vertigo UK, nice price on them bit expensive tho

Riding the other day I found the clutch lever would stop before the handgrip . Still engaging and disengaging correctly I tried adjusting lever but it had shorter stroke . Cheers to mototrials west whom said check the through bolt at the centre of the clutch basket . It had wound itself out , once I chased the bolt threads it went back in and all works correctly again . Bonus is it’s a reusable gasket on the case . A small side note this is the first issue I have encountered on this 2017 vertigo 250 I bought new

Is this bike going to be available in 2018? As it’s the best looking vertigo, the rest of the range are a Bit Ott in the colour department imho. Iknow someone that would quite like one of these ;0).

Hello I just bought a vertigo combat 125 built in 2020 for my son. I am looking for a workshop manual, I have not found anything on the internet, can someone help me?

Anyone have any idea what the spring rate is on a 2017 Ice Hell? I can drop it and check, but I figured I'd ask first. I ask because I've got the preload ring backed all the way out, and I only barely get maybe a half inch of sag. I also feel like the back of the bike is bouncing off bigger hits rather than compressing into them (I weigh 63 kilos, 140lbs) .