Vertigo

Hi. I am a user living in South Korea. 2016 Vertigo I took a look at the specs to replenish the cooling water. castrol radicool sf premix This product is not available in South Korea. It's on eBay, but it's impossible to ship domestically. There is a Motul inugel available in South Korea. Is there any motul product that I can use?

For some reason I thought or read that the Vertigo used the same EFI system as the OSSA (Kokusan). However, I just discovered that Vertigo uses Skynam (AKA Sybele) EFI ( http://www.skynam.com/). thoughts?

Hi, I'm the proud owner of a 2nd hand 2019 DL 250. I'm new to the brand and am discovering the fan is a little noisy. I've been told by the importer that this is normal for vertigos. I also know the prior owner and am told this is normal from him as well. I'm looking at testing some aftermarket options that are quieter. I want to disrupt the existing wiring loom as little as possible, so I'm looking to acquire some of these connectors so I can test out a few options. Anyone know what they are called or where I can get some? Regards, David.

my brother has just bought a 16 ice hell. we was swapping the master cyclinder covers over to some nice red csp ones earlier and noticed the clutch master cyclinder was completely empty of fluid. which seems weird as it worked when I test rode it a few days ago. I'm presuming it will need bleeding rather than just topping up as its completely empty up top. and how are these bled? there isn't a nipple near the casing where the hose is like on my beta. thanks

hi.... I'm jeong won living in South Korea. Vertigo 12v start battery connection is inconvenient So I made a 12v portable starter battery with 18650 batteries. It is 11.1v by connecting three 3.7v batteries, but 12v comes out because it is 4 volts when fully charged. In the photo, the battery hold is on the side but is actually under the air filter. Make a switch and start the engine When started, disconnect the switch. If the switch is connected and kickstarter 3 starts.

I saw a UK vendor info sheet a while back, and it suggested a 200:1 mix ratio. I've been mixing 133:1, which is the 0.75% ratio called out in the manual. I still get a lot of blow by out the exhaust, so I was curious, if you have been mixing 200:1,how's it working out? Since I haven't heard about any seized top ends, I'd guess well enough...

Hi, the clutch on my vertigo combat is very firm/stiff so makes it difficult to use clutch control. Someone mentioned the springs need to be reduced in size, or lube the cable ? Any ideas on please ?

After reading the manual I don’t see any mention of any fuel filter . Is there any? , is it a serviceable ?

Hey All, I am doing an EFI project and want to use the Vertigo throttle body and TPS. Its a good price. Before I go ahead and purchase one, I want to check fitment. Does anyone have any pictures of one? More the better. thanks!

hi. The startup problem was well resolved via the forum. Mister peterb Thank you again. This question is 9v battery capacity question. I need to use a 9v rechargeable battery Can I charge my battery while starting up? And 9v rechargeable battery capacity How much should I use? at Least 200mah? 250mah? Can I use 1000mah? (16 Vertigo Combat 300 )

I'm new here and have just bought a used 2019 Vertigo Combat Vertical 250cc. I'm about to change the oil in both front forks, but I'm a bit unsure about the correct oil level. In the service manual for the bike, it says the oil level should be 130 mm in both forks. However, in the service manual for the forks — which are Tech Suspension — it states that the level should be 130 mm in the left fork and 75 mm in the right. Which one should I trust?

Went to the Bob McGregor Trials Ground yesterday , mainly to test the Vertigo , I also was interested to see what the facility was like . Got to say the Venue is brilliant , the people very friendly & helpful, from Murdo ( organiser) to the girls in cafe . Many thanks to Nick (Vertigo ) for the test ride , trouble is I went convinced I wanted the 300 ( I have a 300 Sherco ) but I thought the 250 was brilliant !! What is holding me off ordering the 250 , is all the other people who tested the 250 ( I spoke to 6 ) all own 2016 300s , and they preferred the 300 !! I rode Nicks 300 Ice Hell 2016 & Murdos Camo 300 2016 ( with flywheel weight ) ) & still…

been looking for a new to me trials bike and spotted a vertigo nearby just concerned its had a new piston for some reason ! is it common for a four year old bike to need a piston or should alarm bells be ringing ???? cheers for any reply's and insights

Recently bought a brand new 'used' 2017 Vertigo Fajardo 250 with literally an hour or two max on the clock, lucky me. Anyway, lovely bike but one question about the chain link fastener. It is mounted on the inside of the chain? I have never seen that on a motorbike before. Looks like a pain in the ass to change and was wondering why they chose this 'design"? What's the reasoning behind this akward location.

Evening, I’m planning on greasing and checking my rear suspension this weekend and it’s a while since I’ve done one, has one got any advice as to what order I strip it all down in ????

Hi there, does anyone have any experience about this bike, how it rides, reliability, ease of maintenance. I have always ridden a Beta Evo 250 and quite fancy a change. I haven't noticed any used one's for sale yet, have many of this model been sold in the U.K. ?, Thanks in advance for your help.

Hello, I just registered since I am the new owner of a Fajardo vertigo replica 300. First of all forgive my English, I write from Spain with the help of a translator. My previous bike was a beta 300 2012, and the change to the new one has been great. Especially a great jump in brakes and suspensions. What has me a little annoying, are the continuous blows in the lower area of the bike, going through the same places that passed without problem with the beta with the vertigo hitting the basses. In a couple of days I already have enough rock marks all over the ground, and even one on the swingarm, which with the beta was much less usual. Do you als…

Hi, in the exploded view u can see part 12 and it seems to me that the piece with the nut is on the inside. On my bike it does not fit that way, only with the nut on the outside to get enough clearance for the brake lever. Anyone has an (2016) that can have a look ? Also there is a "powerbox" in the front under the air filter. According the drawings it is in a rubber grommet. I assume it is a bit confusing and must be the grommet of the ECU. So is the powerbox in a rubber grommet ?

Just back from Santigosa where there were a number of Vertigos in action. Dougies and Dabills bikes were much louder than the others but certainly didn't seem to lack power. Development seems to be on going as looking at each bike there were different set ups being tried in terms of exhausts , yokes hydraulics etc. Overall I was impressed with them

My new 250 ice hell arrived last week and I love it. Just notice it has Michelin X11s on it, would of thought it would come with X Lites?