| |
-
It is not a matter of it leaking, it has to be able to breathe. What happened to your post about jet size?
-
Oh, I always loved the wheelies. I`ve been in trouble many times for my antics. Just think the sit down wheelie on the modern cheaply built bikes is a waste.
-
It is possible to over pack a silencer, you might try riding without the silencer.
-
Hey Chris, have you ever considered the exhaust could be plugged up?
-
Dad`s are always in a hurry to make the kids a better rider. My son went thru many new bikes. In the end it was more about myself wanting my son to excel. Just let him ride the 50 until he is ready to ride the full size 80. Keep the `fun` in riding is more important than the competition at that age.
-
Jon, it sure sounds like the idle circuit is plugged up. He has like 5 different posts going on.
-
Yeah, just joking. Quite the worthless talent. Just like the guy on the Sherco forum breaking the rear mud guard doing sit down wheelies! Then wondering what he is doing wrong!
-
Well, I know you are in the states. Go under your member and add location, you will get more help that way. You might try works performance shocks. Have you tried Mike at the Tryals shop in NY?
-
Tltel is correct that it`s fuel. Just a thought as your first trials bike. It is possible for the choke lever to get stuck partially open due to it`s location. Just double check the arm is sitting down in the groove.
-
Chris, you have anyone that you ride with to compare bikes or give advice. You seem to be searching for something that is hard to fix on just the net. Almost sounds like clutch drag, and the `02 had many clutch issues!
-
So did you leave the fan hard wired. Have you inspected the impellor as they do break being plastic.
-
The pro was geared a little tall. Count the teeth on the counter shaft sprocket. It came with an 11t. A ten will do for most riders.
-
Never seen a `Pro` ride sitting down in a section!?!
-
Glad you have it straight in your head now Jimmie. All this talk reminds me that my sons fork has a slight seep.
-
The bike is not flopping, you have the control through the pegs. You want a long wheelie click it up to fourth and have at it. Any wheelie longer than two feet is just for showing off. But it sure is fun!
-
I would bet they are not wired in the right place and/or poorly grounded.
-
I prefer the mx pants, but remove all tags including large logos sewn on the legs. Throw away the elbow pads once you start feeling good about the bike. If it is truly warm, wear a t-shirt.
-
That is a different rim. I would look closely at the hubs as they would break. I had mine for 17 years and replaced both hubs due to fractures.
-
I would get a used (or borrow) a carb, then make sure it runs. The kick start gear and trans were weak points. I would not spend any more money until you are certain what works. They are great handling bikes. Right now I wished I`d not sold mine!
-
Just curious, are you sure the fan is running and the coolant circuit is good. Ever have the water pump cover off for inspection? Just wondering if the bike is just running too hot.
-
To answer the question, all zoochi`s come apart the same. The `09 had a cartridge change.
-
Did you read step #3. Make sure no air is left in the system?
-
Actually it is a nice repair. I did one on a `92 Zero over 15 years ago that is still holding. I would have gave up and bought a new cover the way the seal was gone. Good job.
-
It should fit. The only concern I would look at is the caliper mount.
-
{I put my 240 on the trailer and went to the local truck scale ... Weighed bike on and bike off ... Scale is certified to be accurate .
And my trusty 240 pro came out at 168 lbs full of fuel .!!!!}
Sorry Glenn, A CAT scale in that weight range is accurate to +,or minus 20 lbs.
|
|
