Montesa

anyone have a link to a diagram site for this delorto? thanks jer

I bought the 315r Mitani clutch pack from lewisport and I can't get a reply back on how to install them into a 315r. There are 2 light discs and 4 dark cork, what bloody order do I put these things in?????? Jason H

does anyone have any pictures of a 315r stickered up as a honda? i'm sure i've seen pics of the japanese riders on them, but can't seem to find any. thanks Ben

Surely the 4RT is getting ready for replacement? As brilliant as it is, it's time HRC/Mont replaced it with a direct injected two stroke less 25 or 30 pounds. Maybe I'll start a petition.

Hi All, Would anybody know how much oil and what viscosity I need to put into the forks on a 304 Montesa. Hope someone can help. Thanks. Phil.

I'm new to trials and mechanics in general but enjoy learning on a 2006 4rt. After oil change, the bolts that secure the side cover on (about 6 or so) have to go on soooooo gently or "SNAP". I got a torque wrench and set it to 16 pounds/ sq. ft. as manual says.....and SNAP, again! I'm soiling my trousers over this! Not really. Is this an issue for anyone else? Do replacement bolts have to be purchased from Honda only? THANKS!!!!

Afternoon again gents, I am looking to try and find some replacement swinging arm bushes for my 1979 Cota 247 C. The guys at in motion couldn't help any ideas ??? Thanks as always. The Wobbler

I am a 175 lb sportsman class rider and am in need of suspension setting tips . I am curious about the preload screw on the lt fork. When I turn it all the way in and back it out 2 turns as per the manual it seems like it is not doing anything except unscrewing the adjuster, in other words no friction or tension is on it when it is turned out 2 turns. As for the comp and rebound adjustments is the compression adjuster on the bottom of the rt fork is it at full compression when turned all the way in ? The rebound adjuster on the rt fork seems to have no effect whether it is turned all the way in or out. I just need a good baseline setting from somebody who understan…

One of the mods to the 2014 engine is a redesigned camshaft which is reported to reduce the engine breaking effect when throttle closes ( crankcase decompression). Will this new cam fit earlier models,if not would it need the new cylinder head to be fitted.

Hi all, I've tried looking at the online 315 manuals but they all seem to be for the showa forks. can someone tell me the oil weight and levels/heights in the older paolini (not sure thats how its spelt) suspenion? Thanks matt

I've got a 2015 Montesa 4rt that I bought new , it's been maintained above and beyond, but I've recently been suffering from what appears to be a rich mixture. I replaced the plug four events ago for an NGK iridium one which has become sooty, as did the last one. It also smells rich when it's on tick over and uses more fuel than other riders that I ride with that have similar bikes. The bike rides and performs well and I assumed with fuel injection that there would be no mixture issues. The air filter is a TwinAir and it's cleaned after each event It also seemed to boil the fuel, for want of a better phrase, at last weekends event. The bike still …

I'm looking to lighten the front end on my 2017 4RT - potentially with an after market front wheel. The 300RR front end is much lighter - I have to believe that shaving weight there is worth the cost. Anyone have any recommendations on where I could get a spoked rim for it - in the US or in the UK? Anyone have any thoughts about other worthwhile mods to make the front end lighter? Thanks

I have been trying to remove the rear wheel bearings for replacement. I can not figure out on how to get them out. If anyone could help with some sugestions or tools it would be a big help.

anyone got a picture of a 315 with the tank and seat combo you can get for long distance riding. I've been looking around for one but haven't come up withanything yet. Where can you order them from. i didn't seee anything on the montesa site.

Does anyone have a solution to stop my rear sprocket bolts loosening off - I'm already using nyloc nuts and loctite. Is the next step split pins or 'R' pins ?? Or do I just keep tightening them up ?

Hi, just wondering if anybody here has had any experience with Rockshocks on a Cota 348. I am looking to upgrade and these are looking favorites due to the fact they are rebuildable and support seems to be very good from reports on here (also they look very nice) What are other people running with or recommend, the bike will be used on Clubman routes in classic trials. Thanks in advance

I have a 4RT and the bike and trialing are new to me. I have noted that the chain tensioner on the left swinging arm has alot of play. Would anyone be able to tell me the correct description for this and what I need to order to sort the problem. The arm itself seems fine, it just the bush/bearing which seems to have failed. cheers ali

Came across this bike a 2014 4rt with exotic wheels, shock and sherco style reverse tank/airbox to get the weight down to 67.6kg http://www.mototrial.it/ And here's where you get the parts http://www.vitititan...moto-trial.html Cheers B

Hi! Any one know where I could get some decals for my 2001 315r I'm after just the 2 side stickers simply read 'Montesa' I've tried the usually places but they seem to be like hens teeth or really naf copies! Any ideas? Thanks

I'm in the process of stripping down the Ulf Karlsson I recently bought, to identify what parts I need to restore it. When I pulled the swingarm there was a rubber guard sandwiched between the front of the swingarm and the rear frame cross piece. It was roughly "H" shape in section and was there to stop the chain damaging this area. It had obviously been reversed at some time as there is significant wear on both surfaces. I'll try to attach a rough sketch of the cross sectional shape in the hope that someone may recognise whether it's actually a Montesa part and where I might get one from.