Skip to content
View in the app

A better way to browse. Learn more.

Trials Central

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

reggie

Members
  • Joined

  • Last visited

Everything posted by reggie

  1. I believe the airbox changed for 1999.
  2. Coolant : Motul Factory Line Motocool Organic + There are lots of good 2 stroke oils and gearbox oils, use good ones.
  3. It may help if you let the forum know exactly where on the tank it is leaking.
  4. Beta has a kit to fix this p/n 007450578 000
  5. Get yourself Beta p/n 1241757 800 then you could adjust w/o the screwdriver and not burn yourself either.
  6. This is an adjustment for where on the cam part of the shaft the rod gets pushed, it will change the engagement length of the clutch.
  7. I think what you really need to look at the the input specifications of the charger that came with your bike.
  8. You said that several plugs were tried, were they new spark plugs ? Try again with a new plug gapped to approx. 0.40mm If there is no spark then try the easy things first, wiring connections, spark plug cap and re-check all chassis and engine grounds with a meter. Good luck.
  9. O-ring p/n BT27810097
  10. reggie replied to brownie001's topic in SWM
    Check out the 2 stroke tuners handbook by Gordon Jennings. I think 1.35mm to 1.5 mm would be a good target.
  11. The first thing( cheapest tp try ) I would do is put in a new NGK plug gapped @ 0.45mm this smaller gap will lessen the load on the ignition.Maybe check your chassis earth this will only take a couple of minutes to clean up. If that does not work I think the next easiest thing to try is swapping out the HT coil / cdi box.
  12. I think the wipers from SKF KIT35M will work. You could also try Gas Gas p/n G280000 and maybe Fantic p/n 364.02.00.5390 Good luck and please post what worked.
  13. I think you mean that shielded bearings are used. I would replace with these same bearings.
  14. Go see your dealer and ask them what they use.
  15. reggie replied to motomanandy's topic in Beta
    2006 Rev3 owner's manual tri*lsp*rtdotcomdotau
  16. Fuel smell at end of silencer confirmed or not ?
  17. I think you either have the bike flooded or you do not have any fuel going into the motor. If you stick your nose at the end of the silencer after you have kicked several times you should have a fuel smell.
  18. Motul Motocool factoryline coolant and Belray Super Dot 4 brake fluid.
  19. 1998 TX250 p/n M01417051 16mm gudgeon pin diameter
  20. TK carbs were used on some years of TY250. Check with your local Yamaha dealer for spare parts.
  21. What year is your bike?
  22. A lot of Japanese riders are sponsored by Dunlop. If you check out what they ride the tires must be capable.
  23. jml The caliper does split into two halves, be careful not to loose the wee o-ring that seals both halves together.
  24. 50 to 1 , to 80 to 1 should all be fine. Regarding riding obstacles, you need to find some people to ride with. You will learn best in a group setting.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.