b40rt
Members
-
Joined
-
Last visited
Everything posted by b40rt
-
What he said, had a rotax that was well worn and rattled as above, but started easily and ran well with plenty of power. (It was a dykes ring)
-
-
https://m.youtube.com/watch?v=MbTCyF1e41c
-
Patrik, have you contacted Dellorto themselves, they might have the information on file. http://www.dellorto.co.uk
-
Martin, have you tried an TX TXR air box for size ?
-
Why not avoid leaving it ticking over ?
-
Last new damper rod I bought was £15 (RS), and easy to rebuild yourself. From what I've seen you post, you would find it easy to do.
-
Not mine Patrik, 2 strokes too many ...
-
and, it will be even better when it uses blue tooth conectivity .....
-
But, it is a state of the (blue tooth) art Montesa.
-
YouTube from last years ssdt
-
Rubbish, next your going to tell me astronomy and astrology aren't the same .....
-
Think you need your medication reassessed.
-
Does the 305 fantic carb have an air screw or a petrol screw ?
-
http://www.billetparts.co.uk/catalog/dellorto-idle-mixture-adjuster-p-165.html Best mod to a Dellorto.
-
A hacksaw is just showing off, I just use my teeth.
-
and Phobophobia, is the fear of phobia's .....
-
I bought a bike that had a brand new set fitted, used them once and put on well used mitch front and IRC rear. Infinitely better, everything else on the bike was the same. (This was about 18 months ago)
-
And Trump will never become president either ..
-
This is the reason they won't do the SSDT, no phone or WiFi signal .....
-
Tube type IRC are a fantastic tyre, no problem on morard or akront rims. Generally run 5 -6 psi as sidewalls are very soft.
-
Could be the bikes geometry, as the bar's rotate the bike drops into the turn.
-
Trials might be more interesting if he had ......
-
-
Just a perforated tube (or should be, they get blocked) I cut a rectangular hole on the carb side, repack with proprietary material. Cut and bend a cover fixed with four rivenuts, sealed with high temp silicon.
