|
-
HO BOY!!!!! A real war as just started.
Guy
-
I'm very happy with my Forma, I bought a new pair this summer that are still in the box. The fit, for me, is perfect and I like flexibility. I ride a lot more than I compete ( at a low level ).
Guy
-
-
John, if I can get to the part, I'll measure the thickness and the with of the band this weekend.
Guy
-
Here is a picture of a B model ( here in Canada )
Guy
-
What model ( A B C.. ) of TY is your flywheel from John, the B model flywheel is heavier than he rest of the model.
Guy
-
Motul 710 2t ay 80/1 in my case.
Guy
-
What we have here in Canada ( Aspen like ) is either 50:1 premix or 4 stroke fuel. I've been using the premix in all the equipment ( 4 str and 2 str ) for many years. I empty the fuel tank run the motor until it starve, put enough in the tank to run the motor for a few minutes and shut it down. When it's time to restart the equipment, I just add fresh fuel and go. Never had any problem since I go that way.
Guy
PS. : It's sadly nearly time to do it in my bikes, the weatherman is calling for snow in the next 2 week.
-
If you buy the 250 and master it, there will be many '' customer '' for your bike. I'm not sure about the other way around.
Guy
-
If you buy the 300 : Luc you'll have to use the FORCE !
Guy
-
I always wear MX pants with underneath hard knee protection . My old bones don't do well against hard surfaces
Guy
-
Intotrials,I ride trials for the challenge of man and machine over terrain.
Guy
-
I bought a 2015 ST250 last September, I just change the quick to slow throttle and change the rear sprocket for a 44t. Enjoyed it since
Guy
-
This morning, I'm going to our local club for the next to last event. Great bunch of guys, nice sections, and I'll mark 5 on each section before I begin the competition because I've seen too many 5 marked as 2 or 3. That way I can enjoy it all and anybody can mark themselves all 0.
I will simply enjoy the ride.
Guy
-
GasGas USA was selling all sorts off S/ stuff, I think Stuart at Jack's have bought a lot off it.
Guy
-
I have to do the timing with the head off my B model, I have a magnetic base for the dial that make the job easy.
Guy
-
Loose rocky downhills, Hummmmm, not sure.
Guy
-
Remember, you sometime get confuse by the play on the front brake. Make sure that what you feel come from the bearing.
Guy
-
I think the 200 is available in Canada.
Guy
-
Does it shift well from 2nd to 3rd and the other gear.
Guy
-
I tried a camelback a few years back, but came back to the bum bag with a small bottle that I refresh if needed at the end of a lap.
Guy
-
He's not Michael Jackson, he wear 2 gloves.
Guy
-
I have a 3rd os Yamaha piston , if you need info.
Guy
-
The worst advise you can take is one from someone with a close mind, the best advice I can give you is follow tshock250 advise!
Guy
-
I had a ride on a new one in the parking of yesterday event here. The bike is a little heavy but plaisant to ride, it feel nimble. Only low score is the clutch is on the stiff side. I will let the owner make the first scratch on it and ask to ride it in a few sections.
Guy
|
|