Everything posted by technowaldo
-
Fantic 200 exhaust joining rubber
2t trials and all your other Fantic parts too
-
First FantIc 200
Looks a good repair I would just leave it
- Fantic 305
-
I hate my rear brakes
Don’t bother the rebuild kit for the m c just bite the bullet and buy a new master cylinder most bother with brakes comes from the m c
-
Fantic paint on eBay ( recommendation)
Paint it outside on a nice day with a mask on and you’ll be fine it’s not as if your doing it every day it’s only a one off
-
Fantic paint on eBay ( recommendation)
2k definitely best paint for the job on top of an etch primer
-
REV 3 Inner Clutch Cover Replacement
I done what Kurtus said and it was leaking again in months just bite the bullet and buy the inner clutch casing for £100 ish it’s an easy fit if it’s your sons bike he might not notice it’s leaked all the fluid out and then you will have a much more expensive seize to repair
- Beta evo fuel tap boss
-
Steel G'Box debris identification 2017 EVO
I’d be tempted just to ride it if it’s still feeling ok and let it develop you might split the crank cases and not find anything
-
Factory forkseal replacement
Give it a wee whiz up with an impact gun until it bites then torque it up manually but go easy
-
Got to ride my bike soon But
Get all that filler chipped off and see what ur dealing with no reason why it can’t be repaired if it’s Ali
-
Stuck dog bone bolt...new frame or go ride?
Take the swinging arm and shock off and get a angle grinder with a 1mm disc and run it through cutting the bolt leftovers so you can remove the dog bone
-
Help needed
Slide it back in under the bench and buy a fantic a guy in our club used to call them multi gyms for good reason
-
Fantic side panel fixings.
Buy a box of mixed ones from eBay you’ll get what you need out of them
-
Fantic 200 starting problems
Yes I had the same problem with one of the original coils replace it and take it from there
-
Fantic 200 starting problems
Is your coil an alloy cylinder or a moulded plastic one
-
cleaning spandex trials pants
Fling them in the washing machine with your wife’s clothes when she’s not in and they come up like new that’s what I’ve been doing for the last 10 years
-
New Montesa Cota
Jet wash it ,let it dry a bit and cover the whole bike in rhino shine
-
Engine Stand
Naccy ,makes sense if your doing a lot of rebuilding
-
OKO Carburetors
Put one on my 200 fantic and it totally transformed it but don’t buy a cheap one (£25 ) as they are a copy of a copy
-
Damaged Fork Replacement/Repairs??
Araldite then wet and dry it smooth
-
240 Pro sounds lean but it’s not
Bin that champion plug for starters fit a ngk
-
Bending back Braktec levers??
Give them a good heat with a plumbers torch in a vice before bending back or they will break
-
Aftermarket seats
Far better with an enduro type of thing the island is littered with legal off road tracks and you will be limited to what you can cover with an evo
-
first trial bike, sherco 300?
300 a lively beast better with a 250 and your mx boots won’t really be much good too stiff and bulky buy a set of trials boots you won’t regret it