Greeves

There are not many Photo's of Greeves trials bikes in the Gallery apart from a Scottish, so I dug out a few of my own A TES from Sammy Millers Museum.

Anybody got any news or has the current economic climate stymied them?

Hi Can anyone tell me if they have information on the type of Puch engine that was fitted to the Greeves Pathfinder? Big finned head. Where can spares be sourced from? Complete engine? How much do you think if i can find one? Look forward to your answers - can you email me direct please? Cheers

Has any body else seen the new video of phil disney trying out the new Greeves. Now is it just my eyes or does the rear mudguard strangely shorten it self half way through the vid. I f so where did it go ,is it extreme weight saving or something more mysterious ?

Has anyone seen or purchased the new Greeves? Ive had a look on there website and it seems very out of date (Sept 2010), no mention of the Scottish trial?

Just finished rebuilding my 24tes New seals, bearings,rebore piston and was advised to go for a new amal now I have two new problems, first she's an absolute pig to start tried flooding it with the tickler no choke then with choke then after loads of kicks she'll fire then on to fault 2 it will tick over for about 10 seconds then it will rev to the max and can't be stopped on the kill switch only using the gearbox and brakes, it's got new gaskets on the inlet and a new oring on the carb, so now I've dropped on the original amal monobloc and with one tickle fired up with two kicks it runs ok but it's really wooly of the bottom, does anyone have any ideas is it me or is thi…

Greeves in action.Oh yes

Hi, I went riding today at a local practice area in the midlands, parked up next to a van with greeves signs all over it, as we rode down we saw two new greeves being tested buy a top trials rider I won't say who just incase I should not mention Who it was!! I know there seems to be alot of negative people out there who have already knocked it! But it certainly looked like it could cope with everything thrown at it! Anyway it's good to see another bike manufacturer back on the scene and british company aswell!! Let's hope they get more support! Rij

I just finished reading an article on Don Smith.I really admire that era of riders because many of them did it all as far as develope,build and ride well. I don,t know much about Greeves other than I like the unique looks and would love to try one out.It had a picture of him on his newly debuted 1964 SSDT bike that he had modified and extensively lightened. I,m just curious what the production one weighed and if anyone has an idea as to what his modified bike weighed? From what I,ve read it seems like Mr. Smith would have been great fun to hang out and ride with as well as learn from.

I have a good friend in South Africa who has a Greeves 250 Anglian (Frame No. 24THSA...) The original swingarm bolt has been replaced with a piece of Metric threaded bar. I've done a bit of reading on the 'Net and what I have managed to find is that the Anglian swingarm pivot bolt is 5/8" UNF. Is that correct? Thanks in advance

Hi sorry to sound dumb Just picked up a greeves Scottish 24 tcs Could anyone let me know the optimum 2 stroke oil to use in this bike and what recommended ratio Cheers in advance

Can anybody point me in the right direction of where to go for a 60 tooth sprocket for my '58 Scottish, please? Thanks.

Its all set to happen at the SSDT for the new Greeves - said to be fielding a three man Team Greeves - wonderfull news, and a real opportunity to prove its worth for the team who have built it and developed it so far. I remember when the first Greeves I saw in the SW Centre back in the late 1950's brought out hillarious outbursts amongst us riders, however, we changed our tune very quickly when Bert Greeves and Derry Preston Cobb got to work and engaged the top development riders of the day and produced the fine Greeves Trials bikes that won just about everything to be had, not to mention their motocross successes,road racing successes and their road going bikes. I thin…

Well Santa has packed his Sleigh away for another year. The Greeves is all ready to go. First Trial Kicks off next week.

There are three Greeves entered in the Scottish, saw them being prepared in the Parc Ferme today.

Hi, I have a Greeves bitsa, basically a 1960 SCS Hawkstone, which has been set up for trials with footrests mounted on the s/a spindle, brake pedal shortened to suit, trials engine plates complete with side stand, Parkinson conversion with thick Tufnol spacer and a trials top fork"yoke" with the ends of the curve pointing forward. Is it the case that all the fork main "H" pieces are the same and a scrambles top yoke with ends of the curve pointing backwards will convert the forks to scrambles trail?. I also think I'll need scrambles engine plates which give a slightly different weight distribution?. I've read the books and done the googling but am stumped, any ad…

Hi people , question please , is Greeves Motorcycles still on the go ,,, Richard Deal

Frank held the major Greeves parts stocks in the USA for many years. http://www.greevesguru.com/ That page on Frank's site says that Frank died this morning, but Kenny Sykes will sell the remaining stock at some future point. Michael

https://www.trialscentral.com/news-archive/uk-trials-news/21206-manchester-17-mcc-ltd-open-fisher-trial-2020 Well done Liam good to see a Greeves winning against such strong and more modern opposition

I'm part way through rebuilding the engine on my 24 tes greeves and was wondering if anyone knows the torque settings for the four alloy tube bolts that bolt the barrel and head to the cases