Jump to content

lineaway

Site Supporter
 View Profile  See their activity

  • Posts

    5,374

  • Joined

  • Last visited

 Content Type 

Everything posted by lineaway
 
 
  1. lineaway
    It might be new, but if the piston does not travel the full length of the stoke and return with some free play. Then the pressure cannot release.
  2. lineaway
    Sounds like you have it too tight. The M/C rod or piston has to have some free play.
  3. lineaway
    I found one laying on the loop last weekend. Turned out it belonged to a mom that could not keep up with her 5 year old on an Oset.
  4. lineaway
    Some of the tech just take a 17mm wrench, I`ll have to look tomorrow. Checked again, a wrench will work. You do have your manual. The stock spring is not too bad? 17 stone plus?
  5. lineaway
    https://www.youtube.com/watch?v=EefBYPSmxZg
  6. lineaway
    Let me guess, Keihin?
  7. lineaway
    We know of five very used 4rt`s. Never a lever problem.
  8. lineaway
    2nd or third, lots of clutch, weight back, drop your heels, ready set go.
  9. lineaway
    The Techno crank was easy as it still was all steel. I`d leave the crank up to someone with the right spacers since all the crap plastic on the new cranks. Used to be a noob would be lost doing a job like splitting the cases. With video and forums like these the job is much easier. Flywheel, clutch and primary gear is much easier with the top end still in place, unless you have air tools.
  10. lineaway
    It`s all about timing. https://www.youtube.com/watch?v=gdwNZdNJtUw&feature=player_embedded
  11. lineaway
    Simple enough to split the cases and do the main bearings. You can then ship the crank for the rod work. There should be no up and down movement on the big end.
  12. lineaway

    Ossa Mar Spokes

    lineaway replied to basketcase's topic in OSSA

    Spokes are done in patterns of four. Start with the tube hole. Using zip ties can help hold them on place. Slow and easy.
  13. lineaway
    The only way to get a lot of fuel in the motor is leaving the petcock on or a bad needle and seat. Have you had starting issues? Normally if the seal goes you suck transmission oil into the crank and have excessive smoking.
  14. lineaway

    2009 Or 2011 Evo 290

    lineaway replied to thebob's topic in Beta

    Could be a 9 with a newer frame as the nine had issues.
  15. lineaway
    Beta did not make the forks. So the dust seals could be found elsewhere. You could just run no dust seals with the neoprene fork covers.
  16. lineaway
    It`s called the Water Buffalo class!
  17. lineaway
    That would be the blue/pink and white era, my 18 year old sure laughs at my photo`s.
  18. lineaway
    Most people bought a 4RT then 4T. It will be interesting to hear your comments.
  19. lineaway
    There are covers made for the Sherco exhaust and tank.
  20. lineaway
    NOTE: for adjustment use a T-handle wrenches with jointed hexagonal socket From the manual.
  21. lineaway
    Very similar in size to a 4 pot AJP. Measure it up and compare.
  22. lineaway
    You will only find a parts breakdown.
  23. lineaway
    http://www.trialscentral.com/forums/topic/57003-photos-of-home-trials-obstacles/ http://www.trials.com.au/forum/viewtopic.php?f=16&t=6012
  24. lineaway
    The internet has thousands of pictures of world champ caliper riders from years and years of events. Find me one rider with bar risers.
  25. lineaway
    https://www.youtube.com/watch?v=Dv3sWgY-RjM
 
×
  • Create New...