Bultaco

I need a new seat for my 250 Alpina #115 1974. I found a cheap site in Spain but they don't ship to the US: https://motosluis.com/tienda/index.php?id_product=2858&rewrite=asiento-bultaco-alpina-115-116-137-138&controller=product I tried this site in NY state, http://www.bultacoclassic.com/, but get any answers from my emails (out of business?) Any experiences or good address ?

hi whats the best plug and gap for 350t currently got bp6es came with bike but not sure if its right its a 151 model 1975 350 cheers

hi as stated in previous posts I am a total novice when it comes to bultaco as always been a yam man. any advice on best sprocket combination how many teeth front and back for nice slow tricky sections I will not be riding on road. any advice appreciated cheers

Hello everyone Just bought a alloy tank for my Bultaco. I was just wondering what are the best type of decals to get? Waterslide (SM Products) or printed vinyl (Inmotion)? Or any other types you may recommend. Cheers in advance, Kelvin

Hi took the bulk of the paint of forks someone painted over the black with a thick dark blue paint now down to metal with black streaks and a bit left of blue to rub of by hand.Is there a hard wearing black spray or paint i could buy cheap to put back to near original black.Went to halfords and staff member pointed out black hammer spray but it was around 10 quid.I have 5 small tins of metal normal and 5 hammer paint paid 10p a tin in sale a year ago but all silver pity cannot use them as have 3 sets of forks to paint. Also started sanding one of the 198 frames and original colour is white under the blue.So need to buy white spray or paint is there a name for the white so…

I have a set of shocks from a 1971 Alpina. They are red with chrome springs but I do not see any markings on them so am not sure they are Betors. (I could post a picture.) Are these rebuildable? Can I get a manual or procedure somewhere? I saw seals for sale on a web site but that is it. Thanks, Dan

will the shocks in the ad work on my M80 or M159 http://www.usedvictoria.com/classified-ad/11221963 Thanks Sunny

Just Found this on ebay

For gawwds sakes buy another bike. We need a decent thread here.

I know how you love Bultacos BJ so have you seen Vestys 82 Bultaco for sale on www.willbrown.co.uk/adz ? I havent got any spare cash at the moment but you might be interested ? Hope i havent transgressed by posting this if i have i appologise Andy.

Just bought this fixer and not sure about the year and some details if someone out there could help and recommend upgrades. Noticed brake is on left side and thought they were imported with it on the right after 85? also not sure what those shocks are from. have some rust on the upper fork tubes can that be fixed? Many thanks in advance.

hello guys can anybody give me addvice the best way to strap my bultaco on aa dave cooper rack? had a go yesterday but gave up. ive got 4 new straps so if you could help me id be greatfull

hi all im unsure witch to get rack or trailer im going down cornwall next year with my bult would a bike rack be ok all that way or would i be beter off with a trailer? thing is my wife will be driving as i dont not sayin she cant drive ??????? ah ah but im just thinking with a trailer might be abit scary

Just curious what a restored 199B would be worth these days?

I have two other bikes with Bing carburettors that perform perfectly. my 350 Alpina (1977) however has always been a trifle fluffy on low throttle openings. I have just fitted new needle and jet as part of a service and the needle clip was in the lowest groove, what is the recommend position or is it just suck it and see. Thanks.

hi all i have a bing carb 84 dose anybody know where i can buy a pilot jet size 40 been told bing dont make them anymore must be some where i can buy 1

hi all i can onely get my 199A started by puting fuel down the head. ive put new bing carb on witch came with wrong jets. now ive put the right jets in still same. once ive got her going she runs. the inlet pipe is on the right side. and ive got a inline fiter witch some times i have to mess about with to get the fuel going throw. but when ive took the plug of befor puting fuel down the head its been abit wet. ive set the air screw one and a half turns anti clock wise. and playd about with the tick over screw.ive only ajusted the throtel ajuster on the bars. and on top of the carb i need help please

I have been doing some jobs on a friends 199a and have taken the Bing carb off to clean it out.Blew it out with an airline and put it back on the bike.Now the bike runs very poorly as if it is getting too much fuel and flooding,though there is no petrol coming out anywhere.The bike runs as if the choke is on and when you put the choke on it is worse.I have messed about with the float height but seems to make no difference.I know the bike runs fine otherwise as I have put the Amal carb from my own 190 onto it and it runs fine with it on.I have had the Bing on and off numerous times,checked the choke is not stuck on,blown jets out etc but to no avail. The bike was running …

Hello All, I rode my 350 sherpa last weekend and if started to p*** fuel out of the overflow on the carb. It didn't matter if it was running or not. I took the float bowl off and everything seem ok. It's never done this before and I would like to keep my Bing.

hi guys quick question----does the needle go below the plastic holder in the carb because i think i have been putting it inside with the spring on top for a while now . kind regards murray