Jump to content

baldilocks

Members
  • Posts

    3,282
  • Joined

  • Last visited

Everything posted by baldilocks
 
 
  1. see if you can sell the 300 barrel piston and head then buy new 250 barrel piston and head. what have you tried to calm it down ?
  2. woodruf key sheared ? bike will still spark but in the wrong place in terms of tdc. that doesnt explain the lack of fuel though, did you inspect reeds ?
  3. Hi all i have greased the swinging arm bushes on my sons oset and am intending getting a lighter spring for the shock off the oset website to make the rear suspension more suitable for his weight. However Oset dont list softer springs for the forks anyone managed to soften them as i would like to make both front and rear softer.
  4. you were correct. buffet breakfast so plenty tea didnt make it to chairlift...
  5. Hi If you click on the link for the shock on the splatshop site there is a comprehensive guide on set up at the foot of the page
  6. May have ? you have all 47 of my dabs at Achintee on saturday ! Great Week absolutely loved it.
  7. Got that move from Valentino.....
  8. Hi John commented on a thread started by Neil Sturgeon. Copey im thinking what can i break on my bike that GG cant fix....should be fun !!
  9. the switch is just a switch i think, it either passes current or it doesnt. when i tested mine the softer setting doesnt pass current so i figure if i remove it then its stuck on the softer setting. only bike i could tell a difference on was my 250 sherco.
  10. add John Moffatt as a friend, its in one of his postings tonight
  11. Seems to be some confusion in the highlands. When i said i liked no stop i meant the observing rules not the blinkin rain......
  12. John Moffat said on facebook its cancelled Andy so i doubt its wrong.
  13. ok taff the frame tube just below the rad is the same diameter as the bars so just fit it there then you can still play with it.
  14. Perce has the right idea . I broke the knuckle on my right hand by trapping it between the bar end and a rock last year. I had domino grips on and the end is quite thick. It would have been a lot worse with bar ends fitted. educate the rider to fix the problem.
  15. based on the 2012 model if you remove the switch its then set to the softer map. just removed the switch from my 2013 Gasser and thats the same.
  16. skf are expensive but they do last longer like 8/10 months. Or get the cheap ones off ebay and change every month !
  17. this maybe worth discussion seems more practical if the judgemental aspect is less critical
  18. Get the bike out as a present to yourself Wayne. happy birthday
  19. ill bear that in mind riding to chairlift !
  20. with weather since Christmas it may well be condensation. Warm engine into water barely above freezing ? or where have you routed the breather may be from jet wash
  21. if you hadnt i would have had to say that !
  22. what? i spent years developing a secret identity and your going to just tell every one !!! :-) at the minute i think environmental issues, MSA / Road Traffic Act and lack of youth new starters present a far greater risk to trials as we know it than petty in fighting over which rules we prefer. I was being sarcastic with the yawn but there are bigger issues to address which we choose to ignore.
  23. 2010 was a handful 2011 /12 seem smoother and meant to be softer than 290. However id question why bother making it if its smoother.
 
×
  • Create New...