lineaway

You never mentioned the fan or coolant.

It,s about 3 mm difference in throat diameter. Good way to have an air leak.

The trouble would be finding a new intake manifold.

Bent disc?

http://www.splatshop.co.uk/sherco-float-pin-keihin.html

150 would work. You really should try to take it apart and replace the seals. It is real cheap if you go to a hydraulic shop and have them measured up. Less than 20 bucks for seals and o rings on my Ohlins.

It needs to come apart. Refilled with nitrogen.

I scored Tennessee in `13 and watched Fuji and company during practice being chased by which engineer? Fuji was p****d off at the bike! Seemed to be the new two plug engine. Lap top in hand. Or was I just dreaming that a laptop could fix his problem? PS. Martin there is nothing wrong that EFI bikes make last minute adjustments at that riding level!

So did you get your Gas Gas front bracket and fender yet? Just ordered mine on ebay.

Without digging my bike out, I would say it`s a little loose (worn). Just hold it after it starts.

Should be down. Did you turn on the petcock? Did you turn the petcock off when you transported?

You would have better luck on a Japanese forum. Pretty rare bike. The new plastic does look great!

The Sherco usually does not rattle. But any well used bike could. I had a beta that was only a few months old that the clutch would whine like hell. The bike was ridden very hard by an up and coming rider. Could just be grooves in the clutch basket.

You all forget, he has a bike with a vacuum fuel pump. Lot`s of other issues here.

He never said it was Bou.

Well if you make it to Kingman next year, you will get to see the engineers chase Fuji and Bou around.

I prefer a torch, a little tough on the plastic of the EVO.

I find most problems are brought on by the owner one way or another. Check out any of the forums that actually give on honest answer on what the end result of the problem was. The exception might be the electronics as they are almost all made in china now and the new style connectors seem to have constant connectivity issues. This includes the 4RT as they have issues that other bikes would never have. Otherwise every time a new model comes along is when the most complaints happen. Back to the question, no. Most of the bikes in the mid eighties were built better. TY Mono, RTL`s, TR34, Fantics.

Actually they pointed to the tower where the pilot jet sits. Way more of an angle than you would think. http://trialsport.com.au/beta/Manuals/mikuni/

You need to clean the choke circuit including the float bowl.

Beta USA trials team manager has ridden the 4T ever since it came out as the rev 4. Always without the tensioner.

You can run without them on most bikes.

The biggest problem I could see is changing elevation often. That is what I have issues with. From the way I understood it the mapping has to be changed, and it is not so simple to find a dealer.

You wanna be bicycle guys. This is a top rider that crashed with a full face bike helmet. https://road2recovery.com/cause-view/scotty-cranmer/

You can always shift up with your heel.