Vertigo

Thinking of a new Vertigo has anyone tried the new 280?

Any reviews of the fajardo replica.

Result says it all, surely good news for UK trials with DLs connections. Only one 5 in a very stiff trial and the bike still under development? A new benchmark!

Is there a nack to get out the rear wheel spacers as I like to pack the bearings with grease but I'm struggling to get them out

Hey All, I am doing an EFI project and want to use the Vertigo throttle body and TPS. Its a good price. Before I go ahead and purchase one, I want to check fitment. Does anyone have any pictures of one? More the better. thanks!

Just back from Santigosa where there were a number of Vertigos in action. Dougies and Dabills bikes were much louder than the others but certainly didn't seem to lack power. Development seems to be on going as looking at each bike there were different set ups being tried in terms of exhausts , yokes hydraulics etc. Overall I was impressed with them

Evening, I’m planning on greasing and checking my rear suspension this weekend and it’s a while since I’ve done one, has one got any advice as to what order I strip it all down in ????

Hello all, I've just bought a 2024 nitro 300. What spark plug should I run as I was told in my 2018 vertigo to run the hotter BPMR4A rather than the BPMR6A. Do you still need to do this on the newer bikes? Many thanks

Hi I have a vertigo nitro 250. I stepped down from a 280 trs and found the bottom end to be a bit too soft for my liking. I have been playing around with the get ecu tuning, more fueling off the bottom seem to help a bit but I'd like a bit more power. I'm wondering if advancing the ignition timing off the bottom would help? But I'm worried about messing with it too much. Other alternatives I'm assuming could be adding a high compression head? Has anyone tired this? Hoping to get some suggestions. Thanks!

What gearing are people using? Mines 9x39

hello, I have a vertigo replica Fajardo 300. I had problems with the crankshaft bearings, and since I changed them, my motorcycle when it wants it does not have a spark in the spark plug when it is hot. In motion it never stops, but when trying to start when it seems to it, it does not spark. any ideas to look at?

I’ve had my 2017 bike from new and never had any problems - still on the original 9V battery! However, when I got the bike out yesterday for the first ride in a few weeks it would start OK but would not run smoothly. It felt as if it was running very rich, it wouldn’t rev very cleanly and then struggled to tick over. I checked the plug and it was very black. Also quote smoky when it was running. Vertgio UK weren’t sure what it was but clarified that the TPS sensor failure usually makes the bike very lean, so unlikely to be that. Am about to book it into a dealer for a check, but has anybody got any suggestions?

Hi, I'm the proud owner of a 2nd hand 2019 DL 250. I'm new to the brand and am discovering the fan is a little noisy. I've been told by the importer that this is normal for vertigos. I also know the prior owner and am told this is normal from him as well. I'm looking at testing some aftermarket options that are quieter. I want to disrupt the existing wiring loom as little as possible, so I'm looking to acquire some of these connectors so I can test out a few options. Anyone know what they are called or where I can get some? Regards, David.

Got a 2021 Combat works 250, and its really hard to start from cold. Once its hot, not problem, 1 or 2 kicks every time. I've read that i should be doing 3/4 slow kicks, then quarter throttle and kick it properley. I'm usually into about 20 kicks before it comes alive? It's got a brand new BPMR4A plug in (previously a 6 but same symptoms). Fuel is super unleaded with 30ml (170:1) of rock oil. Any ideas?

Well done Vertigo, lovely looking bike to get the kids excited, only comments would be, how about some protection on that exhaust pipe ? Little people falling off in the mud and they don't have the self preservation instincts ( or burn experiance ) of adults to know not to touch it. Will it be entry level pricing or is it a rich mans toy.

I bought a battery less Ice Hell in March. Worked the World Round last weekend. My AZ dealer has new maps particularly for high elevation. Would have gotten it loaded but didn't have my scoot with me. Anyone get the new map yet? I live and ride at 7000' elevation. Sometimes up to 10k' sometimes sea level. Thanks. Checking world round was great. Most of the GP2 women and many of the GP 2 men and GP women were nice and thanked us on the last loop. Many of the top GP men and their minders were cheaters, grooming and basically jerks. I didn't give a yellow card but threatened. FIM should give financial penalties and clean up the sport.... End of rant. ;o)

on my brothers ice hell we was checking over all the bolts etc and noticed the swingarm allen head bolt on the left is just spinning and doesn't get any tighter. the right hand side is tight. is there a nut you cant see behind the tank or somewhere to hold whilst you tighten it? thanks

Hi there, does anyone have any experience about this bike, how it rides, reliability, ease of maintenance. I have always ridden a Beta Evo 250 and quite fancy a change. I haven't noticed any used one's for sale yet, have many of this model been sold in the U.K. ?, Thanks in advance for your help.

Hi all, I just bought a 2020 Vertical 200. It was advertised as a 200 and it has a 200 sticker on the rear fender. Interestingly, the original Titile of origin says it is a 125 and the motor is stamped with a 125 code. Does any know if there is any way to verify this bike is actually 200cc ?

Anyone have any maps they would care to screenshot and share for map 1 & 2. Pic for att.