Vertigo

So does anyone have any idea how people have ponied up for the top line titanium Vertigo? A friend of mine has ordered one which started the discussion as to whether he will be the 10th or 500th. Spencer

I’m looking at doing some suspension tweaks on my bike, I just feel it’s a bit firm at both ends, I’ve had it about a year so it will all be well bedded in. It’s not something I’ve done before I tend to just get used to how there set up but I feel I need to alter mine now. Any advice would be great

on my brothers ice hell we was checking over all the bolts etc and noticed the swingarm allen head bolt on the left is just spinning and doesn't get any tighter. the right hand side is tight. is there a nut you cant see behind the tank or somewhere to hold whilst you tighten it? thanks

Hi guys, has anyone removed their swing arm? Do I need an extractor to remove the anodised red semi axis?

Hi Folks, my Vertigo ('17 Ice Hell 300) rear linkage has developed a fair amount of play in the swingarm. Appears the dog bones are worn. I have heard there is a newer rear linkage design for the '18 and newer models which I believe is compatible with the '17 models (?). Anyone know if this is so? And if it is recommended to make the switch? Or should I just replace dog bones and be done with it? Cheers!

So... I'm at a loss. It seems to me that once you disconnect the lower linkage connectors, removing the 'axle' bolts should more or less do the trick. But of course it doesn't, and I'm starting to think perhaps there's a special tool required (or maybe just a large bolt of the correct pitch) to thread into and remove the pieces that Vertigo refers to as the swingarm semiaxis. Anyone had their off?

Looks like the venues and dates should be announced in the next week.

Hello everyone, I have a problem again with my Vertigo Busto 2021 250cc and I can't find the solution. I would like to post the problem to see if you have a solution. Some time ago, I had fueling problems during training. Thinking that dirt had gotten into the air screw of the injection body, I dismantled the injection body. I noticed that the tps sensor was free with the screw loosened.. Since then, it's been a mess! The motorcycle starts cold but rattles and smokes abnormally then when hot it stops by itself. Here's what I did: TPS Replacement TPS re…

What are you using? The manual on the vertigo site specs a Castrol synthetic ATF (the closest thing I can get in the US is Mobil 1 Synthetic ATF). The US importer seems to recommend a Maxima 0w10 (no idea why). A close US dealer runs regular ATF. Maybe anything vaguely oil like will suffice.

Is there a price for the entry model? Ta.

Hi All! The Vandal LR looks great. Has the same engine as the Combat, in a different chassis and has an electric start and a 3.4 liter fuel tank. I think this is a perfect trials bike for trial excursion.

Is the E start Vandal really going to happen?

I've just had a look at upgrading my 300 icehell for a new 2018 model to find Vertigo are only producing the titanium model R and the new Virtical model. All good and well until you read the spec and see that the virtical model is last years Camo spec but at icehell price. Sorry but at £7000 I would be buying a bike with less spec than what I have. Full details on Spanish Vertigo website. Someone Please prove me wrong that Vertigo are not trying to rip me off....

Any rumors about the R bike?

Hi all, I have a 2019 Vertigo and for some reason I keep getting a lot of transmission oil from the breather hose to the airbox, and from there the oil drips everywhere, it gets pretty messy. I have heard from a Vertigo mechanic that the new Vertical R has a "oil catcher tank" inside the airbox so that the oil won't get all over the place, but in the Vertical R parts diagram I cannot find the drawing or the part number code.... Can anyone help me out? TIA!

Hi there, does anyone have any experience about this bike, how it rides, reliability, ease of maintenance. I have always ridden a Beta Evo 250 and quite fancy a change. I haven't noticed any used one's for sale yet, have many of this model been sold in the U.K. ?, Thanks in advance for your help.

Hi I have 2020 Vertical 250 . I have the Get system & have played about with adjustments, but can’t get that softness at initial throttle opening I would like. Slightly retarding ignition wld normally achieve this , like I did on previous bikes plus on my old 240 Fantic , on Vertigo this just produces engine braking!! I know on Gas Gas they fit low compression heads to smooth out bottom end & Beta lads have put extra base gasket on 300 s to do the same . So my ? Is , I think they do a low compression for 300 but not 250 ? Has anyone tried extra base or head gasket ? If u do base or head gasket ,is any re-programming needed ? Thanks

Just test rode the new vertigo trials bike. Its some bike the build quality is amazing and it rides brilliant. The one thing i noticed was the grip is was great 3 foot deep mud and it just ploughed through it. What do you think the reliability will be like it has been tested for 2 years but i am not sure what weaknesses it may have any idea. Many thanks